Estimation of pore size distribution of porous media based on percolation theory

被引：0

作者：

Ding, Binbin ^{[1
]}

Li, Chaolin ^{[1
]}

机构：

[1] Environmental Science and Engineering Research Center, Shenzhen Graduate School, Harbin Institute of Technology, Shenzhen, 518055, Guangdong

来源：

Huagong Xuebao/CIESC Journal | 2015年 / 66卷 / 05期

关键词：

Filtration; Model; Percolation theory; Pore size distribution; Porous media;

D O I：

10.11949/j.issn.0438-1157.20141546

中图分类号：

学科分类号：

摘要：

Based on percolation theory and network model, an equation describing the relationship between filtration coefficient and pore size distribution (PSD) of filter media was established. Using this equation, PSD parameters of the filter medium could be obtained from experimental data. Moreover, the result was also compared with PSD parameters estimated by other methods and other data in the literature. In order to validate this method, the obtained PSD parameters were used in the simulation of straining-dominant filtration, and the simulation result was consistent with experimental data. The filtration model based on percolation theory for PSD parameter estimation was relatively accurate and effective. © All rights reserved.

引用

页码：1690 / 1696

页数：6

共 28 条

[1]

Xu S., Gao B., Saiers J.E., Straining of colloidal particles in saturated porous media, Water Resources Research, 42, 12, pp. W12S-W16S, (2006)

[2]

Rege S.D., Fogler H.S., Network model for straining dominated particle entrapment in porous media, Chemical Engineering Science, 42, 7, pp. 1553-1564, (1987)

[3]

Gibson L.J., Ashby M.F., Cellular Solids: Structure and Properties, (1999)

[4]

Langlois S., Coeuret F., Flow-through and flow-by porous electrodes of nickel foam (I): Material characterization, Journal of Applied Electrochemistry, 19, 1, pp. 43-50, (1989)

[5]

Hoefner M.L., Fogler H.S., Pore evolution and channel formation during flow and reaction in porous media, AIChE Journal, 34, 1, pp. 45-54, (1988)

[6]

Liu P., Determining methods for aperture and aperture distribution of porous materials, Titanium Industry Progress, 23, 2, pp. 29-34, (2006)

[7]

Chalk P., Gooding N., Hutten S., You Z., Bedrikovetsky P., Pore size distribution from challenge coreflood testing by colloidal flow, Chemical Engineering Research and Design, 90, 1, pp. 63-77, (2012)

[8]

Banhart J., Manufacture, characterisation and application of cellular metals and metal foams, Progress in Materials Science, 46, 6, pp. 559-632, (2001)

[9]

Fan Y., Li Y., Ma J., Characterization of the nanoscaled pores in porous polydivinylbenzen adsorbents, Acta Polymerica Sinica, 2, pp. 173-179, (2002)

[10]

Yuan H., Shapiro A.A., A mathematical model for non-monotonic deposition profiles in deep bed filtration systems, Chemical Engineering Journal, 166, pp. 105-115, (2011)

← 1 2 3 →