Experimental study of mechanical behaviours of shale under different confining pressures and different strain rates

被引:0
作者
Liu J.-X. [1 ,2 ,3 ]
Zhang K. [2 ]
Liu W. [1 ,3 ]
Shi X.-L. [3 ]
机构
[1] State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University, Chongqing
[2] Civil Engineering and Architecture, Southwest University of Science and Technology, Mianyang, 621010, Sichuan
[3] State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan, 430071, Hubei
来源
Liu, Wei (guarenliuwei@126.com) | 1600年 / Academia Sinica卷 / 38期
关键词
Confining pressure; Elastic modulus; Failure mode; Mechanical properties; Peak strength; Shale; Strain rates;
D O I
10.16285/j.rsm.2017.S1.005
中图分类号
学科分类号
摘要
To investigate the mechanical properties of shale under different confining pressures and different strain rates, the triaxial compression experiments of Longmaxi Group shale samples are conducted under different confining pressures and different strain rates. The experimental results show that the confining pressure and strain rate affect obviously elastic modulus, peak strength and fracture morphology of the shale. The elastic modulus and peak strength increase with the increase of confining pressure, the increase of peak strength is significantly greater than thaengtht of the elastic modulus; and the peak strength showed a linear increasing trend. At a low confining pressure, elastic modulus and peak strength gradually increase along with the inclining of strain rate from low to high; the relationship between the two and the strain rate can be described by a biquadratic polynomial. With the increase of confining pressure, the effect of strain rate on the shale is gradually weakened; at a high confining pressure of 50 MPa, the phenomenon of the compressive strength and elastic modulus increase with the increase of strain rate is terminated. Under condition of low confining pressure and high strain rate, the shale is mainly split shear failure; with the increase of confining pressure and the decrease of strain rate, the failure mode would change from split shear failure to single shear failure; and then gradually transits to a ductile fracture. The results of the test have important guiding roles in establishing the mechanical parameters of shale and designing the fracturing program. © 2017, Science Press. All right reserved.
引用
收藏
页码:43 / 52
页数:9
相关论文
共 21 条
[1]  
Huang Y.-Z., Huang J.-L., Ge C.-M., Et al., A key factor promoting rapid development of shale gas in American: Technical progress, Natural Gas Industries, 29, 5, pp. 7-10, (2009)
[2]  
2011-2015 Shale Gas Development Plan, (2012)
[3]  
Huo L., Yang C.-H., Feng H.-J., Et al., Experimental study on unloading mechanical properties of carbonaceous shale in the Eastern part of Western Hubei, Chinese Journal of Rock Mechanics and Engineering, 35, pp. 2898-2906, (2016)
[4]  
Zhu R.-G., Wu M.-B., Failure criterion of granite at different loading rates, Explosion and Shock Waves, 4, 1, pp. 1-9, (1984)
[5]  
Li Y.-S., Experimental study on the mechanical effect of loading rate on red sandstone, Journal of Tongji University (Natural Science Edition), 23, 3, pp. 265-269, (1995)
[6]  
Bieniawski Z.T., Time-dependent behavior of fractured rock, Rock Mech. & Rock Eng., 2, 3, pp. 123-137, (1970)
[7]  
Peng S.S., Podnieks E.R., Relaxation and the behavior of failed rock, Int. J. Rock Mech. Min. Sci. & Geomech. Abst., 9, 6, pp. 699-712, (1972)
[8]  
Peng S.S., Time-dependent aspects of rock behavior as measured by a servocontrolled hydraulic testing machine, Int. J. Rock Mech. Min. Sci. & Geomech. Abst., 10, 3, pp. 235-246, (1973)
[9]  
Cho S.H., Ogata Y.J., Kaneko K., Strain-rate dependency of the dynamic tensile strength of rock, Int. J. Rock Mech. Min. Sci., 40, 5, pp. 763-777, (2003)
[10]  
Ji W.-D., Yang C.-H., Yao Y.-F., Et al., Effects of loading strain rate on mechanical performances of salt rock, Chinese Journal of Rock Mechanics and Engineering, 30, 12, pp. 2507-2513, (2011)