Dynamic modeling and control of a PMSM position servo system

被引：0

作者：

Wang, Yuzhi ^{[1
]}

Wu, Zhiqiang ^{[2
]}

Xu, Shichao ^{[2
]}

机构：

[1] Sino-French Engineer School of NUST, Nanjing University of Science and Technology, Nanjing

[2] College of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing

来源：

Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument | 2024年 / 45卷 / 04期

关键词：

incremental debugging principle; permanent magnet synchronous motor; position servo system; space vector pulse width modulation; vector control technology;

D O I：

10.19650/j.cnki.cjsi.J2312240

中图分类号：

学科分类号：

摘要：

This article establishes a position servo control model based on the basic electromagnetic relationship and dynamic mathematical model of Permanent Magnet Synchronous Motor (PMSM). Following the principle of closed-loop feedback control, a position control system with three closed loops for current, speed, and position is designed. Firstly, the article, according to the characteristics of PMSM vector control, utilizes the coordinate transformation theory of 3S/ 2S and 2S/ 2R to establish the dynamic mathematical model of the position servo system in the synchronous coordinate system. It also provides the position control strategy and algorithm based on rotor field orientation. Secondly, this paper studies the digital implementation based on Space Vector Pulse Width Modulation (SVPWM) and constructs a three-loop model in the MATLAB/ Simulink environment according to the mathematical model of the motor. Additionally, a prototype based on DSP is built. In simulation and experimentation, the authors employ PI control for both the direct and quadrature axes as well as for speed and position. During the tuning process of control parameters, they adhere to the principle of incremental debugging starting with the inner loop (current loop), then the speed loop, and finally the position loop, achieving closed-loop control of the synchronous motor′s position. Lastly, the article compares and analyzes the simulation results with the experimental results, demonstrating the correctness and effectiveness of the model. © 2024 Science Press. All rights reserved.

引用

页码：226 / 233

页数：7

共 16 条

[1]

QIU X, YU L, NAN YU R., Review of control strategy of permanent magnet synchronous linear motor [ J], Micro Motor, 10, pp. 39-43, (2005)

[2]

CHEN T, ZHOU Y ZH, Research on high-precision decoupling observation of rotor position angle in the low-speed region of a six phase series three-phase dual PMSM drive system [ J ], Chinese Journal of Scientific Instrument, 44, 8, pp. 265-276, (2023)

[3]

LIU Z W., Discussion on the performance, control, and selection of permanent magnet synchronous motors [ J ], China Equipment Engineering, 525, 11, pp. 145-147, (2023)

[4]

YUAN J CH, XU S, CAI H X, Et al., Overview of robot joint motors and their technical development [ J ], Micromotors, 55, 12, pp. 89-95, (2022)

[5]

CHNG SH Q, HUANG H B, LU J, Et al., Research and simulation of permanent magnet synchronous motor vector control technology [ J ], Modern Manufacturing Technology and Equipment, 59, 4, pp. 1-3, (2023)

[6]

XI X, GUO X, GAO C, Et al., Sliding mode control of an outer-rotor magnetic-gear-integrated motor with a Halbach array [ J ], Control Engineering Practice, 137, (2023)

[7]

MAMAT N, KARIM K A, IBRAHIM Z, Et al., Bearingless permanent magnet synchronous motor using independent control [ J ], International Journal of Power Electronics & Drive Systems, 6, 2, pp. 233-241, (2015)

[8]

CHEN B SH., Electric drive automatic control system, 3, pp. 242-244, (2008)

[9]

LIU X J, GU AI Y, PANG CH J., Robust model predictive control of permanent magnet synchronous motor based on PID cost function, Journal of Guangdong University of Technology, 40, 3, pp. 67-73, (2023)

[10]

ZHOU CH X, WU SH Y, ZHANG L, Et al., Simulation analysis of SVPWM control for predictive current source three-phase inverters [ J], Automation Technology and Application, 39, 1, pp. 17-20, (2020)

← 1 2 →