Study on the upper bound solution of supporting pressure for shield tunnel face subjected to pore water pressure

被引：0

作者：

Huang F. ^{[1
,2
]}

Pan Q.-J. ^{[3
]}

Zhang D.-B. ^{[4
]}

机构：

[1] School of Civil Engineering and Architecture, Changsha University of Science & Technology, Changsha, 410004, Hunan

[2] Hunan Province Research Center for Safety Control Technology and Equipment of Bridge Engineering, Changsha, 410004, Hunan

[3] Laboratory 3SR, Joseph-Fourier University, CNRS UMR 5521, Grenoble

[4] School of Energy & Safety Engineering, Hunan University of Science & Technology, Xiangtan, 411201, Hunan

来源：

Gongcheng Lixue/Engineering Mechanics | 2017年 / 34卷 / 07期

关键词：

Numerical simulation; Pore water pressure; Spatial discretization technique; Tunnel face; Upper bound theorem;

D O I：

10.6052/j.issn.1000-4750.2016.01.0055

中图分类号：

学科分类号：

摘要：

Based on the upper bound theorem and spatial discretization technique, an upper bound failure mechanism for a shield tunnel face that can be applied to saturated stratum was established. By regarding the work rate of pore water pressure as an external loading work rate, the effect of pore water pressure is introduced into the virtual work rate equation of the upper bound theorem, and the upper bound solution of supporting pressure for tunnel face subjected to pore water pressure was obtained by optimizing calculation. To evaluate the validity of the upper bound solutions, the ultimate supporting pressures for tunnel face subjected to pore water pressure were computed by numerical simulation. The numerical solutions were compared with the upper bound solutions. The comparing results show that the upper bound solutions are very close to the numerical solutions. Finally, the influence of parameters variation on the upper bound solution and the failure surface of the tunnel face was studied. The parametric analysis demonstrates that pore water pressure has significant influence on the upper bound solution of supporting pressure while it has slight influence on the range of failure surface of tunnel face. © 2017, Engineering Mechanics Press. All right reserved.

引用

页码：108 / 116

页数：8

共 18 条

[1]

Huang M., Song C., Lu X., Upper bound analysis for stability of a circular tunnel in heterogeneous clay, Chinese Journal of Geotechnical Engineering, 35, 8, pp. 1504-1512, (2013)

[2]

Song C., Huang M., Lu X., Upper bound analysis of plane strain tunnel in nonhomogeneous clays, Rock and Soil Mechanics, 32, 9, pp. 2645-2662, (2011)

[3]

Senent S., Mollon G., Jimenez R., Tunnel face stability in heavily fractured rock masses that follow the Hoek-Brown failure criterion, International Journal of Rock Mechanics and Mining Sciences, 60, pp. 440-451, (2013)

[4]

Wang H., Huang M., Lu X., Et al., Upper-bound limit analysis of stability of shield tunnel face considering seepage, Chinese Journal of Geotechnical Engineering, 35, 9, pp. 1696-1704, (2013)

[5]

Bobet A., Effect of pore water pressure on tunnel support during static and seismic loading, Tunnelling and Underground Space Technology, 18, 4, pp. 377-393, (2003)

[6]

Chungsik Y., Interaction between tunneling and groundwater-numerical investigation using three dimensional stress-pore pressure coupled analysis, Journal of Geotechnical and Geoenvironmental Engineering, 131, 2, pp. 240-250, (2005)

[7]

Shin J.H., Potts D.M., Zdravkovic L., The effect of pore-water pressure on NATM tunnel linings in decomposed granite soil, Canadian Geotechnical Journal, 42, 6, pp. 1585-1599, (2005)

[8]

Viratjandr C., Michalowski R.L., Limit analysis of submerged slopes subjected to water drawdown, Canadian Geotechnical Journal, 43, 8, pp. 802-814, (2006)

[9]

Huang F., Yang X., Huang K., Et al., Upper bound solutions of supporting pressure of shallow cavities subjected to pore water pressure based on nonlinear failure criterion, Chinese Journal of Geotechnical Engineering, 33, 12, pp. 1904-1909, (2011)

[10]

Kim J., Salgado R., Yu H.S., Limit analysis of soil slopes subjected to pore-water pressures, Journal of Geotechnical and Geoenvironmental Engineering, 125, 1, pp. 49-58, (1999)

← 1 2 →