Reliability Evaluation and Quantitative Analysis of Multi-terminal Interconnect Power Distribution System with Flexible Multi-state Switch

被引：0
作者：
Liu W. [1 ]
Liu X. [1 ]
Wang R. [1 ]
Huang Y. [1 ]
Yang Y. [2 ]
Li J. [2 ]
机构：
[1] State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources, North China Electric Power University, Beijing
[2] State Grid Zhejiang Electric Power Co., Ltd., Hangzhou
来源：
Gaodianya Jishu/High Voltage Engineering | 2020年 / 46卷 / 04期
基金：
国家重点研发计划;
关键词：
Access strategy; Decoupling; Flexible multi-state switch; Quantitative analysis; Reliability model;
D O I：
10.13336/j.1003-6520.hve.20200430002
中图分类号：
学科分类号：
摘要：
In order to meet the requirements of flexible multi-state switch access strategy planning in multi-terminal interconnected power distribution systems, a reliability evaluation method for multi-terminal flexible interconnected power distribution systems with flexible multi-state switches is proposed in this paper. Firstly, based on the physical structure of the flexible multi-state switch and its control operation strategy, the reliability evaluation model of the flexible multi-state switch is established. Secondly, based on the system operation mode and network structure change brought by the flexible multi-state switch access system, the load recovery strategy for disconnected side is designed and the factors affecting the system reliability are refined. Finally, a reliability evaluation method based on sequential sampling and fault analysis decoupling is proposed, and the influence of different access strategies of flexible multi-state switches on system reliability is quantitatively analyzed. The simulation results show that after the flexible multi-state switch is connected, the SAIFI is increased by about 38.2%, the SAIDI is increased by about 49.6%, the ASAI is increased by about 1.1%, and the reliability of the distribution network system is improved significantly. The research results can provide theoretical supports for the research of flexible multi-state switch access strategy, and provide references for the planning and design of flexible interconnected power distribution network in the future. © 2020, High Voltage Engineering Editorial Department of CEPRI. All right reserved.
引用
收藏
页码：1114 / 1123
页数：9
相关论文
共 22 条
  • [1] Wang C., Song G., Li P., Et al., Flexible interconnection technology and prospect of intelligent distribution network based on intelligent soft switch, Automation of Electric Power Systems, 40, 22, pp. 168-175, (2016)
  • [2] Ma Z., An T., Shang Y., Domestic and international distribution frontier technology trends and development, Proceedings of the CSEE, 36, 6, pp. 1552-1567, (2016)
  • [3] Wang Z., Xu Y., Liu W., Et al., A two-step decision-making method for flexible multi-state switch optimization access, High Voltage Engineering, 45, 10, pp. 3068-3075, (2019)
  • [4] Wang Y., Chen Y., Zeng Q., Et al., An improved MMC sub-module capable of clearing DC faults and its characteristics, High Voltage Engineering, 45, 11, pp. 3595-3602, (2019)
  • [5] Wang X., Guo J., Pang H., Et al., Structural reliability analysis of modular multilevel converters, Proceedings of the CSEE, 36, 7, pp. 1908-1914, (2016)
  • [6] Guo H., Wen J., Tang G., Et al., Reliability analysis and optimization design of main circuit of HVDC converter valve, Proceedings of the CSEE, 29, pp. 39-43, (2009)
  • [7] Song Y., Sun C., Li P., Et al., Power supply recovery method for active distribution network based on intelligent soft switch, Proceedings of the CSEE, 38, 15, (2018)
  • [8] Lou R., Zhang X., Cong P., Et al., Fault recovery strategy for active distribution networks with flexible soft switches, Automation of Electric Power Systems, 42, 1, pp. 23-31, (2018)
  • [9] Fotuhi-Firuzabad M., Rajabi-Ghahnavie A., An analytical method to consider DG impacts on distribution system reliability, Transmission & Distribution Conference & Exhibition: Asia & Pacific, (2005)
  • [10] Ozdemir A., Caglar R., Mekic F., A new active failure simulation approach for distribution system reliability assessment, International Conference on Power System Technology, (1998)
123