Kinematic analysis of separating-transplanting mechanism with differential eccentric gear train based on inequality model

被引：0

作者：

Yin, Jianjun ^{[1
]}

Wu, Chuanyu ^{[2
]}

Yang, Simon X ^{[3
]}

Liu, Yan ^{[1
]}

机构：

[1] Key Laboratory of Modern Agricultural Equipment and Technology, Ministry of Education, Jiangsu University

[2] School of Mechanical Engineering and Automation, Zhejiang Sci.-Tech. University

[3] School of Engineering, University of Guelph

来源：

Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery | 2012年 / 43卷 / 10期

关键词：

Eccentric gear; Inequality model; Kinematic analysis; Separating-transplanting mechanism;

D O I：

10.6041/j.issn.1000-1298.2012.10.010

中图分类号：

学科分类号：

摘要：

An inequality model was proposed to correct the intersection and separation of working contours of matching teeth under equality model, which should not take place in real eccentric involute gear transmission. When 5000 coordinate points of involutes working contours of benchmark tooth were determined to compute the inequality model, the coordinate control precision of searching meshing points can reach 0.001 mm and the angle error can reach 0.001°. Computation showed that the angle error will become bigger with the increment of gear eccentricity, and be exaggerated gradually when multistage eccentric involute gears drive. The inequality model may solve accurately relative motion relationship between gear box and planting arm, and its accurate position and posture can be obtained when seedling-claw takes seedlings from seedling box and pushes seedlings into soil. Angle values of driven gears round both sides of the center gear are not equal with driving gear angle at the 180°, which results in path misalignment of seedling-claws fixed on forward planting arm and backward planting arm. Simulation result of ADAMS software validated that the solutions of the inequality model were correct. The path error was less than 1.01 mm when gear eccentricity was 0.1043.

引用

页码：53 / 59

页数：6

共 12 条

[1] Ying Y., Zhao Y., Analysis and study of transplanting mechanism with planetary eccentric gears, Transactions of the CSAE, 13, 2, pp. 130-134, (1997)
[2] Zhao Y., Sun L., Yu G., Properties and applications of the eccentric-gear drive, Chinese Journal of Mechanical Engineering: English Edition, 24, 2, pp. 323-332, (2011)
[3] Yu G., Zhang W., Sun L., Et al., Application of planetary gear train with eccentric gears and non-circular gear in backward rotary transplanting mechanism, Transactions of the CSAE, 27, 4, pp. 100-105, (2011)
[4] Guo L.S., Zhang W.J., Kinematic analysis of a rice transplanting mechanism with eccentric planetary gear trains, Mechanism and Machine Theory, 36, 11-12, pp. 1175-1188, (2001)
[5] Han J., Wang G., Differential model of eccentric involutes gears transmission, Chinese Journal of Mechanical Engineering, 41, 2, pp. 61-64, (2005)
[6] Kurokawa S., Yasutsune A., Takuya N., Transmission error analysis of involute cylindrical gears with consideration of gear eccentricity, Transactions of the Japan Society of Mechanical Engineers: Part C, 73, 8, pp. 2367-2374, (2007)
[7] Ji S., Li S., Chen S., Et al., Simulation of three separating planting bars of high-performance rice transplanter based on ADAMS, Transactions of the Chinese Society for Agricultural Machinery, 41, SUPPL., pp. 82-85, (2010)
[8] Li Y., Sun F., Analysis model on trapped oil and backlash calculation in external gear pump, Journal of Drainage and Irrigation Machinery Engineering, 29, 2, pp. 118-122, (2011)
[9] Yin J., Li Y., Li S., Et al., Separating-transplanting mechanism with differential eccentric gear train: China, 201010272362.8, (2011)
[10] Zhang Z., He J., Tang Y., Et al., Research on parameter equation of involute tooth profile on any angular position, Journal of Mechanical Transmission, 29, 2, pp. 10-13, (2005)

← 1 2 →