Simplified calculation method of symmetrically reinforced concrete members under small eccentric compression

被引：0
作者：
机构：
[1] Department of Civil Engineering, Hunan University, Changsha
来源：
Huang, L. (huangliangstudy@126.com) | 1600年 / Tsinghua University卷 / 30期
关键词：
Depth of compression; Eccentric compression member; Reinforced concrete; Simplified method; Small eccentricity;
D O I：
10.6052/j.issn.1000-4750.2012.07.0550
中图分类号：
学科分类号：
摘要：
In current code, GB 50010-2010, the calculation formula of symmetrically reinforced concrete members under small eccentric compression is complicated and inconvenient to use. This paper presents two simplified methods: updated linear method and Simplified method of ξ. The former method is based on the modification of the small eccentric curve, and thus the calculation of compression depth is not needed; The latter method simplifies the calculation formula of compression depth into linear function with eccentricity. The calculation steps and formulas of both simplified methods are simple and practical. Experimental data are compared with the proposed formulas and good agreement is observed. The calculated reinforcement by the proposed formulas has good accuracy, meeting the requirement of engineering design. The accuracy declines when the compression N is close to the balance compression Nb, in that case, the reinforcement should be properly adjusted.
引用
收藏
页码：107 / 114
页数：7
相关论文
共 10 条
  • [1] Alaoui S.S., Klingner R.E., Reinforced concrete sections under moment and axial load, Concrete International, 29, 10, pp. 63-67, (2007)
  • [2] Mostafaei H., Kabeyasawa T., Axial-shear-flexure interaction approach for reinforced concrete columns, ACI Structural Journal, 104, 3, pp. 218-226, (2007)
  • [3] Aschheim M., Hernandez-Montes E., Gil-Martin L.M., Optimal domains for flexural and axial loading, ACI Structural Journal, 105, 11, pp. 720-728, (2008)
  • [4] GB50010-2010, Concrete structure design code, (2010)
  • [5] Performance of reinforced concrete members under eccentric compression, Reinforced Concrete Structure Research Reports 2, pp. 19-61, (1981)
  • [6] Li P., Bi S., Section design of symmetric reinforcement for compression members with small eccentricity, Building Science Research of Sichuan, 30, 2, pp. 7-9, (2004)
  • [7] Tian G., Ye L., Qu Z., Simplified method for flexural strength of RC members based on superposition method, Building Structure, 36, SUPPL., pp. 61-65, (2006)
  • [8] Li R., New method of calculating members in micro eccentrical compression of symmetrically reinforced rectangular cross-section, Industrial Construction, 28, 5, pp. 43-46, (1998)
  • [9] Zhou C., Zhang Y., He Y., A design method of symmetrical reinforcement members subjected to small eccentric compression by secant method, Journal of Shandong Agricultural University (Natural Science Edition), 37, 1, pp. 133-135, (2006)
  • [10] Li B., Hua S., Design method of symmetric reinforcement for hydraulic concrete compression member with small eccentricity, Sichuan Institute of Building Research, 34, 3, pp. 47-49, (2008)
1