Research of laser beam welding of inconel alloy

被引：0
|
作者：
Hodulova E. [1 ]
Kovarikova I. [1 ]
Simekova B. [1 ]
Bárta J. [1 ]
Kovacocy P. [1 ]
Sahul M. [1 ]
机构：
[1] Slovak University of Technology in Bratislava, Faculty of Material Science and Technology in Trnava, Ulica Jána Bottu č. 2781/25, Trnava
来源：
Materials Science Forum | 2020年 / 994卷
关键词：
Fusion zone; Inconel alloy; Laser beam; Mechanical properties; Weldability;
D O I：
10.4028/www.scientific.net/msf.994.96
中图分类号：
学科分类号：
摘要：
Study of weld joints of nonferrous, Inconel 625 alloy sheets using a new generation disk laser as the green welding technology for the effective manufacturing were carried out, and the results are presented in this paper. Weld joints of the Inconel 625 alloy sheets 2,0 mm thick were welded by laser without an additional material at a flat position, using a high purity argon as the shielding gas. The influence of laser welding parameters on weld quality and mechanical properties of test joints was studied. The influence of welding speed and laser power to the joint quality was investigated. The study of quality and mechanical properties of the joints were determined by metallographic evaluation, tensile and hardness tests. © 2020 Trans Tech Publications Ltd, Switzerland.
引用
收藏
页码：96 / 103
页数：7
相关论文
共 50 条
  • [1] The systematic parameter optimization in the Nd:YAG laser beam welding of Inconel 625
    Jelokhani-Niaraki, M. R.
    Arab, N. B. Mostafa
    Naffakh-Moosavy, H.
    Ghoreishi, M.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 84 (9-12) : 2537 - 2546
  • [2] Laser Beam Welding of a Low Density Refractory High Entropy Alloy
    Panina, Evgeniya
    Yurchenko, Nikita
    Zherebtsov, Sergey
    Stepanov, Nikita
    Salishchev, Gennady
    Ventzke, Volker
    Dinse, Rene
    Kashaev, Nikolai
    METALS, 2019, 9 (12)
  • [3] Electron Beam Welding of Inconel 718
    Patel, Vivek
    Sali, Akash
    Hyder, James
    Corliss, Mike
    Hyder, David
    Hung, Wayne
    48TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 48, 2020, 48 : 428 - 435
  • [4] Electron beam welding of rolled and laser powder bed fused Inconel 718
    Sali, Akash
    Patel, Vivek
    Hyder, James
    Hyder, David
    Corliss, Mike
    Hung, Wayne
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 120 (7-8) : 5451 - 5468
  • [5] Microstructure and Mechanical Properties of Fiber Laser Welding of Aluminum Alloy with Beam Oscillation
    Pang, Xiaobing
    Dai, Jiahui
    Chen, Shun
    Zhang, Mingjun
    APPLIED SCIENCES-BASEL, 2019, 9 (23):
  • [6] Comparative investigation on single laser beam and dual laser beam for lap welding of aluminum alloy
    Chen, Lin
    Mi, Gaoyang
    Zhang, Xiong
    Wang, Chunming
    JOURNAL OF LASER APPLICATIONS, 2020, 32 (04)
  • [7] Laser beam welding of an Oxide Dispersion Strengthened super alloy
    H. J. K. Lemmen
    K. J. Sudmeijer
    I. M. Richardson
    S. van der Zwaag
    Journal of Materials Science, 2007, 42 : 5286 - 5295
  • [8] A Study on Laser Beam Welding (LBW) Technique: Effect of Heat Input on the Microstructural Evolution of Superalloy Inconel 718
    Odabasi, Akin
    Unlu, Necip
    Goller, Gultekin
    Eruslu, Mehmet Niyazi
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2010, 41A (09): : 2357 - 2365
  • [9] Transient thermal analysis of laser beam welding of titanium alloy sheet
    Kumar, Uday
    Ansari, Kadir
    Kumar, Pawan
    Mandal, Pradeep Kr
    Karmali, Harendra
    Dewangan, Saurabh
    MATERIALS TODAY-PROCEEDINGS, 2022, 63 : 510 - 514
  • [10] Performance analysis of process variables on laser beam machining of inconel-718 alloy
    Samson, Manoj R.
    Ranjith, R.
    Nirmal, R.
    Geethapriyan, T.
    3RD INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2020), PTS 1-6, 2020, 912
12345