Rapid measurement of particle ratio in soil by laser induced breakdown spectroscopy

被引：0

作者：

Gu, Yanhong ^{[1
,2
]}

Zhao, Nanjing ^{[1
]}

Ma, Mingjun ^{[1
]}

Meng, Deshuo ^{[1
]}

Yu, Yang ^{[1
]}

Wang, Yin ^{[1
]}

Hu, Li ^{[1
]}

Fang, Li ^{[1
]}

Jia, Yao ^{[1
]}

Wang, Yuanyuan ^{[1
]}

Liu, Jianguo ^{[1
]}

Liu, Wenqing ^{[1
]}

机构：

[1] Key Laboratory of Environmental Optics and Technology, Anhui Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Hefei, 230031, Anhui

[2] University of Science and Technology of China, Hefei, 230026, Anhui

来源：

Zhongguo Jiguang/Chinese Journal of Lasers | 2015年 / 42卷 / 11期

关键词：

Chromium; Element particle ratio; Laser-induced breakdown spectroscopy; Saha-Boltzmann equation; Soil; Spectroscopy;

D O I：

10.3788/CJL201542.1115002

中图分类号：

学科分类号：

摘要：

Calibration-free laser induced breakdown spectroscopy (CF-LIBS) requires that the elements be normalized, various elements are involved in calculation. However, the spectral line of microelements in the soil is weak, and it is difficult to draw the Saha-Boltzmann plot. The element particle ratio method is used to calibrate the concentration of Cr in soils from a variety of national standard samples as well as local acquisition. The temperature of the plasma is calibrated from Saha-Boltzmann equation and the electron density is determined from the line width of Al I 309.284 nm. The assumption of the local thermal equilibrium (LTE) is validated by the McWhirter criterion. The particle ratio of Cr and Si is calculated by Saha-Boltzmann plot and Saha equation. The concentration of Cr can be calculated. The relative error for the national standard soil samples is less than 7%, and is less than 16.438% for the field collected samples. The results indicate that the element particle ratio method can be used in the concentration analysis of Cr in soils to improve performance of the LIBS technique in rapid detection of soil element content. © 2015, Chinese Laser Press. All right reserved.

引用

页数：7

共 17 条

[1] Arab M., Bidin N., Rizvi Z.H., Et al., Comparison study of two commercial spectrometers for heavy metal analysis of laser induced breakdown spectroscopy (LIBS), Photonic Sensors, 4, 1, pp. 63-69, (2014)
[2] Li W., Huang L., Yao M., Et al., Investigation of Pb in Gannan navel orange with contaminant in controlled conditions by laserinduced breakdown spectroscopy, Journal of Applied Spectroscopy, 81, 5, pp. 850-854, (2014)
[3] Aparna N., Vasa N.J., Sarathi R., Et al., Feasibility study for detecting copper contaminants in transformer insulation using laserinduced breakdown spectroscopy, Applied Physics A, 117, 1, pp. 281-288, (2014)
[4] Meng D., Zhao N., Liu W., Et al., Quantitative measurement of Cr in soil using laser induced breakdown spectroscopy combined with standard addition method, Chinese J Lasers, 41, 7, (2014)
[5] Shen Y., Yao S., Pan G., Et al., Influence of binder on laser-induced breakdown spectroscopy measurement of unburned carbon in fly ash, Chinese J Lasers, 41, 3, (2014)
[6] Chen X., Dong F., Tao G., Et al., Fast lithology identification by laser-induced breakdown spectroscopy, Chinese J Lasers, 40, 12, (2013)
[7] Ciucci A., Corsi M., Palleschi V., Et al., New procedure for quantitative elemental analysis by laser-induced plasma spectroscopy, Applied Spectroscopy, 53, 8, pp. 960-964, (1999)
[8] D'Andrea E., Pagnotta S., Grifoni E., Et al., A hybrid calibration free/artificial neural networks approach to the quantitative analysis of LIBS spectra, Applied Physics B, 118, 3, pp. 353-360, (2015)
[9] Liu Z., Li L., The application of calibration-free laser induced breakdown spectroscopy, Technology Innovation and Application, 14, pp. 25-26, (2014)
[10] Corsi M., Cristoforetti G., Hidalgo M., Et al., Application of laser-induced breakdown spectroscopy technique to hair tissue mineral analysis, Applied Optics, 42, 30, pp. 6133-6137, (2003)

← 1 2 →