Joining Mechanism on Resistance Spot-welding between Aluminum Alloy and Steel and Evaluation of Joining Strength

被引：0
|
作者：
Nishino S. [1 ]
机构：
[1] Graduate School of Science and Engineering, Ibaraki University
来源：
Keikinzoku Yosetsu/Journal of Light Metal Welding | 2020年 / 58卷 / 10期
关键词：
Aluminum alloy; Fracture mechanism; Intermetallics; Joining strength; Mild steel; Resistance spot-welding;
D O I：
10.11283/jlwa.58.22
中图分类号：
学科分类号：
摘要：
In this study, joining mechanism of aluminum alloy/steel resistance spot-welding was investigated with micro observation and analysis on joining area by SEM-EDX, comparing with steel/steel and aluminum alloy/aluminum alloy spot joining. Results were obtained as follows. The shear tensile strength of aluminum alloy/steel resistance spot-welding was lower than a half of the maximum value of steel/steel due to the diŠerence in resistance value between steel and aluminum alloy, close to the shear tensile strength of aluminum alloy/aluminum alloy. The aluminum alloy played a major role in joining of aluminum alloy/steel. In the resistance spot-welding of aluminum alloy/ steel, the joining strength depended on aluminum melting at the joining interface and diffusing and adhering to steel. The intermetallics played the important role on the joining between steel and aluminum alloy. The fracture occurred on the aluminum side. On the aluminum alloy/steel resistance spot-welding, the hardness of steel increased by heating. On the other hand, the hardness of aluminum remained unchanged. © 2020 Japan Light Metal Welding and Construction Assoc.. All rights reserved.
引用
收藏
页码：392 / 400
页数：8
相关论文
共 50 条
  • [21] Combining resistance spot welding and friction element welding for dissimilar joining of aluminum to high strength steels
    Oliveira, J. P.
    Ponder, K.
    Brizes, E.
    Abke, T.
    Edwards, P.
    Ramirez, A. J.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2019, 273
  • [22] JOINING THE COMBINATION OF AHSS STEEL AND HSLA STEEL BY RESISTANCE SPOT WELDING
    Kascak, L'ubos
    Spisak, Emil
    Gajdos, Ivan
    ACTA MECHANICA ET AUTOMATICA, 2013, 7 (02) : 75 - 78
  • [23] Dissimilar Joining of High-Strength Steel and Aluminum Alloy Using Resistance Spot Welding with Die- and Punch-Shaped Electrodes
    Iyota, Muneyoshi
    Hamaguchi, Takuya
    Koga, Yuto
    15TH INTERNATIONAL ALUMINIUM CONFERENCE, INALCO 2023, 2023,
  • [24] Joining phenomena of resistance spot welded joint between titanium and aluminum alloy
    Qiu, Ranfeng
    Zhang, Xin
    Shi, Hongxin
    Yu, Hue
    Zhang, Keke
    FRONTIERS OF MANUFACTURING SCIENCE AND MEASURING TECHNOLOGY, PTS 1-3, 2011, 230-232 : 982 - 986
  • [25] Joining of Steel to Aluminum Alloy by AC Pulse MIG Welding
    Park, Hyoung Jin
    Rhee, Sehun
    Kang, Mun Jin
    Kim, Dong Cheol
    MATERIALS TRANSACTIONS, 2009, 50 (09) : 2314 - 2317
  • [26] Joining aluminum alloy to ultrahigh-strength boron steel through an impact welding approach
    Kapil, Angshuman
    Thurston, Brian
    Vivek, Anupam
    Daehn, Glenn
    MANUFACTURING LETTERS, 2020, 25 : 30 - 33
  • [27] High Strength Aluminium Sheet Metal Joining by Resistance Spot Welding
    Gradinger, Rudolf
    Sotirov, Nikolay
    Rettenbacher, Gottfried
    Pangerl, Christoph
    Doerner, Philipp
    Minichshofer, Stefan
    Becirovic, Almedin
    Melzer, Carsten
    Uffelmann, Dirk
    LIGHT METALS TECHNOLOGY 2013, 2013, 765 : 761 - +
  • [28] Friction stir spot welding of aluminum alloy/steel plate with position-controlled joining equipment
    Sugimoto, Yukihiro
    Keikinzoku/Journal of Japan Institute of Light Metals, 2024, 74 (08): : 363 - 368
  • [29] Development of Aluminum Alloy/Galvanized Steel Joining Method Using Refill Friction Stir Spot Welding
    Takeoka, Naoki
    Miyama, Takuma
    Matsuda, Tomoki
    Ogura, Tomo
    Ohashi, Ryoji
    Hirose, Akio
    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2021, 39 (04): : 379 - 385
  • [30] Development of aluminum alloy/galvanized steel joining method using refill friction stir spot welding
    Takeoka, Naoki
    Miyama, Takuma
    Matsuda, Tomoki
    Ogura, Tomo
    Ohashi, Ryoji
    Hirose, Akio
    WELDING INTERNATIONAL, 2022, 36 (06) : 370 - 378
12345