Research of vibration and strategy in high speed cold-rolling mill

被引：3

作者：

Wei L. ^{[1
]}

Dai Z. ^{[1
]}

Xiao Z. ^{[1
]}

Qu Z. ^{[2
]}

机构：

[1] School of Materials Science and Engineering, Shanghai Institute of Technology, Shanghai

[2] College of Engineering, Shanghai Second Polytechnic University, Shanghai

来源：

Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2016年 / 52卷 / 11期

关键词：

Cold-rolling mill; Lubrication; Rolling; Steel strip; Vibration;

D O I：

10.3901/JME.2016.11.088

中图分类号：

学科分类号：

摘要：

Dealing with the vibration behavior in the 5th mill with the rolling seed over 650 m/min for T5 strip continuous cold rolling in one of the steel enterprises of China, starting with the measurement and analysis of the mill vibration, the vibration source and frequency are confirmed, and the measured results and the patterns of the vibration are verified by FEM. According to the conclusion that the vibration is caused by the lubricant state in the roll's gap, with optimizing the lubricating state of the mill, the vibration behavior is eliminated while rolling the T5 strip with the rolling speed to/over 900 m/min, the mill's bottle-neck problem for T5 strip rolling is overcome. © 2016 Journal of Mechanical Engineering.

引用

页码：88 / 94

页数：6

共 16 条

[1]

Zhou J., Xu L., Control Tandem Cold Rolling Mill Vibration, (1998)

[2]

Lin H., Zou J., Yue H., The effect of rolling liquid to strip cold rolling vibration, Iron and Steel, 31, 10, pp. 60-64, (1996)

[3]

Sun Z., Zou J., The effect of rolling lubricate frication to rolling mill vibration, Heavy Machinery, 6, pp. 25-27, (1998)

[4]

He R., Yue H., Zhou J., The research of tandem cold rolling mill mode test, Steel Rolling, 3, pp. 9-12, (1999)

[5]

Zhou J., Shi X., Sun Z., Diagnose strip tandem cold rolling mill self-excited vibration, Iron and Steel, 32, 7, pp. 65-68, (1997)

[6]

Lin H., Zou J., Yue H., Four-h cold rolling mill chatter of the three-octave, Iron and Steel, 34, 12, pp. 56-59, (1999)

[7]

Yan X., Wang H., Zhou J., Et al., Important progress of coupling vibration inhibition on modern tandem mil, China Metallurgy, 24, 4, pp. 1-4, (2014)

[8]

Chen P., Wang Z., Wang C., Research of chatter marks on steel strip surface, World Iron and Steel, 2, 4, pp. 28-31, (2002)

[9]

Roberts W.L., 4-H mill stand chatter of fifth octave mode, Iron and Steel Engineer, 55, 10, pp. 41-47, (1978)

[10]

Gou R.M., Andre C.U., Schunk J.H., Analysis of chatter vibration phenomena of rolling mills using finite element methods, Iron and Steel Engineer, 1, pp. 29-37, (1993)

← 1 2 →