Photoelectrochemical investigation of radiation-enhanced shadow corrosion phenomenon

被引：2

作者：

Kim Y.-J. ^{[1
]}

Rebak R. ^{[1
]}

Lin Y.-P. ^{[2
]}

Lutz D. ^{[2
]}

Crawford D. ^{[2
]}

Kucuk A. ^{[3
]}

Cheng B. ^{[3
]}

机构：

[1] GE Global Research Center, Schenectady

[2] Global Nuclear Fuel-America, Wilmington, NC

[3] Electric Power Research Institute, Palo Alto, CA

来源：

Journal of ASTM International | 2010年 / 7卷 / 07期

关键词：

ECP; Galvanic corrosion; Impedance; Photoelectrochemistry; Shadow corrosion; Zr alloys;

D O I：

10.1520/JAI102952

中图分类号：

学科分类号：

摘要：

The photoelectrochemical investigation was performed by measuring the photoelectrochemical behavior of various alloys such as Zircaloy 2, 304 stainless steel (SS) and Alloy X-750 in 0.01M Na2SO4 at 25°C or in high purity water at 300°C under intense ultraviolet (UV) illumination. UV was selected because its photon energy (∼5 eV) is similar to the energy gap of the electron-hole pairs in zirconium oxide. The data show that the photoexcitation of ZrO2 caused the corrosion potential to shift in the anodic direction and produced anodic photocurrents under the oxidizing water chemistry condition when Zircaloy 2 electrode was galvanically coupled with dissimilar electrodes, such as Alloy X-750, 304 SS, or Pt, causing accelerated corrosion of Zircaloy. It is thus postulated that the photoelectrochemical enhancement of surface reaction kinetics at the ZrO2 surface may be responsible for the radiation-enhanced corrosion on Zircaloy (i.e., shadow corrosion). In addition, it is revealed that no significant change in galvanic current between Zircaloy 2 and other dissimilar electrodes was measured in high temperature water containing only hydrogen that resulted in similar ECPs. These data thus clearly provide an explanation for why the radiation-enhanced corrosion of Zircaloy only occurs in BWRs but not PWRs. Based on galvanic corrosion, impedance, and transmission electron microscopy analysis, it is proposed that the defect structure of equiaxed grain layers may be responsible for the photoelectrochemical response of ZrO2 in high temperature water. The mechanism of shadow corrosion is still highly debated but it appears to be similar to a process of galvanic corrosion in connection with sufficiently conducting Zr oxide structure. The galvanic corrosion data suggests that a Zr coating on the fuel assembly spacer (Alloy X-750 or 304 SS) may mitigate the shadow corrosion in BWRs. Copyright © 2010 by ASTM International.

引用

共 41 条

[1]

Cox B., Garzarolli F., Adamson R., Rudling P., Strasser A., Fuel Material Technology Report, 1, (2006)

[2]

Standard specification for zirconium and zirconium alloy ingots for nuclear application, Annual Book of ASTM Standards, (2007)

[3]

Cox B., Zirconium alloy corrosion, Uhlig's Corrosion Handbook, (2000)

[4]

Cox B., Some thoughts on the mechanisms of in-reactor corrosion of zirconium alloys, J. Nucl. Mater., 336, pp. 331-368, (2005)

[5]

Dignam M.J., Mechanisms of ionic transport through oxide films, Oxide and Oxide Films, 1, (1972)

[6]

Kim Y.J., Effect of noble metal addition on electrochemical polarization behavior of hydrogen oxidation and oxygen reduction on type 304 stainless steel in high-temperature water, Corrosion, 55, 5, pp. 456-461, (1999)

[7]

Madou M.J., Frese Jr. K.W., Morrison S.R., Photo-electrochemical corrosion of semiconductors for solar cells, Proceedings of the Society of Photo-Optical Instrumentation Engineers, Vol. 248, Role of Electro-Opt in Photovoltaic Energy Convers, pp. 88-95, (1980)

[8]

Canfield D.G., Morrison S.R., Effect of surface films on photo-electrochemical solar cell performance, Appl. Surf. Sci., 10, 4, pp. 493-505, (1982)

[9]

Morrison S.R., Electrochemistry at Semiconductor and Oxidized Metal Electrodes, (1984)

[10]

Lemaignan C., Corrosion or zirconium alloy components in light water reactors, ASM Metals Handbook, 13 C, (2006)

← 1 2 3 4 5 →