Characterization of a pediatric rotary blood pump

被引：2

作者：

de Melo T.R. ^{[1
]}

Vasconcelos F.J.S. ^{[1
]}

Ribeiro L.H.R.D. ^{[1
]}

Bacht S. ^{[2
]}

Cestari I.A. ^{[2
]}

Neto J.S.D.R. ^{[1
]}

Lima A.M.N. ^{[1
]}

机构：

[1] Federal University of Campina Grande, Campina Grande, PB

[2] Bioengineering Division, Heart Institute, São Paulo, SP

来源：

Research on Biomedical Engineering | 2018年 / 34卷 / 04期

基金：

巴西圣保罗研究基金会;

关键词：

Centrifugal flow pump; Lumped parameter model; Rotary blood pump; System identification; Ventricular assist device;

D O I：

10.1590/2446-4740.180046

中图分类号：

学科分类号：

摘要：

Introduction: A ventricular assist device (VAD) is an electromechanical pump used to treat heart failures. For designing the physiological control system for a VAD, one needs a mathematical model and its related parameters. This paper presents a characterization procedure for determining the model parameter values of the electrical, mechanical, and hydraulic subsystems of a pediatric Rotary Blood Pump (pRBP). Methods: An in vitro test setup consisting of a pRBP prototype, a motor driver module, an acrylic reservoir, mechanical resistance and tubings, pressure and fluid flow sensors, and data acquisition, processing, and visualization system. The proposed procedure requires a set of experimental tests, and a parameter estimation algorithm for determining the model parameters values. Results: The operating limits of the pRBP were identified from the steady-state data. The relationship between the pressure head, flow rate, and the rotational speed of the pRBP was found from the static tests. For the electrical and mechanical subsystems, the dc motor model has a viscous friction coefficient that varies nonlinearly with the flow. For the hydraulic subsystem, the pressure head is assumed to be a sum of terms related to the resistance, the inertance, the friction coefficient, and the pump speed. Conclusion: The proposed methodology was successfully applied to the characterization of the pRBP. The combined use of static and dynamic tests provided a precise lumped parameter model for representing the pRBP dynamics. The agreement, regarding mean squared deviation, between experimental and simulated results demonstrates the correctness and feasibility of the characterization procedure. © 2018, Brazilian Society of Biomedical Engineering. All rights reserved.

引用

页码：299 / 309

页数：10

共 23 条

[1]

Astrom K.J., Wittenmark B., Adaptive Control, (1994)

[2]

Capoccia M., Development and characterization of the arterial windkessel and its role during left ventricular assist device assistance, Artif Organs, 39, 8, pp. E138-E153, (2015)

[3]

Chen H., Extended recursive least squares algorithm for nonlinear stochastic systems, In: Proceedings of the American Control Conference, pp. 4758-4763, (2004)

[4]

Choi S., Boston J.R., Thomas D., Antaki J.F., Modeling and identification of an axial flow blood pump, Proceedings of the 1997 American Control Conference, pp. 3714-3715, (1997)

[5]

Truwave Disposable Pressure Transducer [Internet], (2018)

[6]

Ganushchak Y., van Marken Lichtenbelt W., van der Nagel T., de Jong D.S., Hydrodynamic performance and heat generation by centrifugal pumps, Perfusion, 21, 6, pp. 373-379, (2006)

[7]

Experts in Non-Invasive Flow Measurement [Internet], (2018)

[8]

Jahanmir S., Hunsberger A.Z., Heshmat H., Tomaszewski M.J., Walton J.F., Weiss W.J., Lukic B., Pae W.E., Zapanta C.M., Khalapyan T.Z., Performance characterization of a rotary centrifugal left ventricular assist device with magnetic suspension, Artif Organs, 32, 5, pp. 366-375, (2008)

[9]

Lim E., Cloherty S.L., Reizes J.A., Mason D.G., Salamonsen R.F., Karantonis D.M., Et al., A dynamic lumped parameter model of the left ventricular assisted circulation, Proceedings of the 29Th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, pp. 3990-3993, (2007)

[10]

Ljung L., System Identification: Theory for the User, (1987)

← 1 2 3 →