Measuring method research on solid mass flow rate of dense gas-solid two-phase flow

被引：1

作者：

Zhang, Hu ^{[1
]}

Hu, Chun-Bo ^{[1
]}

Sun, Hai-Jun ^{[1
]}

Deng, Zhe ^{[1
]}

Xu, Yi-Hua ^{[2
]}

机构：

[1] National Key Laboratory of Combustion, Flow and Thermo-Structure, College of Astronautics Northwestern Polytechnical University, Xi'an

[2] Aircraft Engineering College, Nanchang Hangkong University, Nanchang

来源：

Guti Huojian Jishu/Journal of Solid Rocket Technology | 2015年 / 38卷 / 01期

关键词：

Cyclone separator; Gas-solid two-phase flow; Measuring method; Particle mass flow; Powder rocket engine;

D O I：

10.7673/j.issn.1006-2793.2015.01.026

中图分类号：

学科分类号：

摘要：

To measure the solid particle mass flow rate in the cold calibration of powder rocket engine and powder ramjet system, a method of measuring the mass flow rate of dense gas-solid two-phase flow was introduced, and a measuring equipment was designed in accordance with the method, which is based on the cyclone separator and electronic balance. Then a list of experiments were carried out to test the accuracy and reliability, and the experimental repeatability of the measuring equipment, by using the powder-supplying system. Experimental results show that the powder collection efficiency of cyclone separator is up to 98.5%, which guarantees measurement of mass flow rate; The measuring method has a better reliability and accuracy, with the relative error of measuring results less than 5%; And the relative error of repeat experiments are less than 2%, which shows that the measuring method has a better stability; Once more, through changing the structure parameter, the range of application of measuring method will be broadened. ©, 2015, Journal of Solid Rocket Technology. All right reserved.

引用

页码：136 / 140

页数：4

共 3 条

[1] Goroshin S., Higgins A.J., Kamel M., Powdered Metals as Fuel for Hypersonic Ramjets
[2] Krabicka J., Yan Y., Finite-element modeling of electrostatic sensors for the flow measurement of particles in pneumatic pipelines, IEEE Transactions on Instrumentation and Measurement, 58, 8, pp. 2730-2736, (2009)
[3] Matsusaka S., Masuda H., Simultaneous measurement of mass flow rate and charge-to-mass ratio of particles in gas-solids pipe flow, Chemical Engineering Science, 61, 7, pp. 2254-2261, (2006)

← 1 →