Impact of different sludge inoculum on microbial community formation of the microbial fuel cells

被引:0
作者
Jiang Q. [1 ]
Zhang L. [1 ]
Sun R. [1 ]
Ren N. [1 ]
机构
[1] State Key Laboratory of Urban Water Resource and Environment(Harbin Institute of Technology), Harbin
来源
Ren, Nanqi (rnq@hit.edu.cn) | 2018年 / Harbin Institute of Technology卷 / 50期
关键词
High-throughput sequencing; Microbial community; Microbial fuel cell; Wastewater plant sludge;
D O I
10.11918/j.issn.0367-6234.201710018
中图分类号
学科分类号
摘要
To investigate the impact of different sludge inoculum on microbial community formation of the anode in microbial fuel cells, single-chamber bottle-shaped microbial fuel cell with air cathode and planar Indium tin oxide glass anode were utilized as the experimental reactors, inoculated by sludge from Chinese and American Sewage wastewater treatment plant separately. The results indicate that the overall operation efficiency of Chinese sludge inoculated reactor is better than that of American sludge inoculated one, which shows shorter start-up time, higher operation voltage, output power density, current density, and COD removal efficiency. There are significant differences in the communities composition of the two reactors, which may be related to the fact that the one sludge is not treated by chlorination/ dechlorination. The diversity of the communities in the sludge from Chinese plant is higher than that from American plant. The communities in the former were distributed mainly in five classes. While the communities in the latter were distributed mainly the 3 classes. Using Indium tin oxide glass as the anode in microbial fuel cells could harvest the whole biofilm to do the high-throughput sequencing, resulting more accurate data to do the following analysis. © 2018, Editorial Board of Journal of Harbin Institute of Technology. All right reserved.
引用
收藏
页码:34 / 39
页数:5
相关论文
共 25 条
  • [1] Davis F., Higson S.P., Biofuel cells-ecent advances and applications, Biosensors and Bioelectronics, 22, 7, pp. 1224-1235, (2007)
  • [2] Logan B.E., Regan J.M., Electricity-producing bacterial communities in microbial fuel cells, TRENDS in Microbiology, 14, 12, pp. 512-518, (2006)
  • [3] Wang M., Yang Z., Xia M., Et al., Performance improvement of microbial fuel cells by lactic acid bacteria and anode modification, Environmental Engineering Science, 34, 4, pp. 251-257, (2017)
  • [4] Qi Q., Wang X., Jia Y., Latest research development of electrode materials for microbial fuel cells, Sci Technol Rev, 33, 14, pp. 28-31, (2015)
  • [5] Zhou Y., Peng X., Ruan G., Et al., Progress in modification of anode materials for microbial fuel cells, Technology of Water Treatment, 3, pp. 9-13, (2017)
  • [6] Wang X., Electricity generation from multiple biomass and the development of key technologies in microbial fuel cells, (2010)
  • [7] Wu W., Yang F., Liu X., Et al., Influence of substrate on electricity generation of Shewanella loihica PV-4 in microbial fuel cells, Microbial Cell Factories, 13, 1, (2014)
  • [8] Lovley D.R., Electromicrobiology, Annual Review of Microbiology, 66, pp. 391-409, (2012)
  • [9] Jiang Q., Xing D., Sun R., Et al., Anode biofilm communities and the performance of microbial fuel cells with different reactor configurations, RSC Advances, 6, 88, pp. 85149-85155, (2016)
  • [10] Rabaey K., Clauwaert P., Aelterman P., Et al., Tubular microbial fuel cells for efficient electricity generation, Environmental Science & Technology, 39, 20, pp. 8077-8082, (2005)