Flow characteristics of a plane jets with deflectors inside the nozzle

被引：0
作者：
机构：
[1] Graduate School of Natural Science and Technology, Kanazawa University, Kanazawa-shi, Ishikawa, 920-1192, Kakuma-machi
来源：
| 1600年 / Japan Society of Mechanical Engineers卷 / 79期
关键词：
Convergent deflector; Divergent deflector; Flow control; Flow measurement; Flow visualization; Jet; Mean velocity; Nozzle; Turbulent intensity;
D O I：
10.1299/kikaib.79.2728
中图分类号：
学科分类号：
摘要：
The present paper describes the flow characteristics of a plane air jet with deflectors. The divergent or convergent deflector was installed symmetrically inside of the plane nozzle. The effects of the angle and the length of deflectors on the mean and fluctuating velocities, and the velocity ratio of the inner jet to outer jet at the nozzle exit were examined by the hot-wire measurement and the flow visualization. In the case of the jets with the divergent deflector, the outer jet was accelerated and the inner jet was decelerated. The spreads of jet with the divergent deflector increased in the near field of the jet. In the case of the jets with convergent deflectors, the outer jet was decelerated and the inner jet was accelerated. The spreads of plane jet with the convergent deflector was smaller than the other jet. The relation between the velocity ratio of the nozzle exit, the area ratio, the pressure drop, the spreading rate and the virtual origin of a plane jet with divergent or convergent deflectors was found. ©2013 The Japan Society of Mechanical Engineers.
引用
收藏
页码：2728 / 2742
页数：14
相关论文
共 13 条
  • [1] Zijnen B.G.H., Measurements of the distribution of heat and matter in a plane turbulent jet of air, Applied Scientific Research, Section A, 7, pp. 277-292, (1958)
  • [2] Mi J., Deo R.C., Nathan G.J., Characterization of turbulent jets from high-aspect-ratio rectangular nozzles, Physics of Fluids, 17, 6, pp. 0681021-0681024, (2005)
  • [3] Deo R.C., Mi J., Nathan G.J., The influence of nozzle aspect ratio on plane jets, Experimental Thermal and Fluid Science, 31, 8, pp. 825-838, (2007)
  • [4] Alnahhal M., Panidis Th., The effect of sidewalls on rectangular jets, Experimental Thermal and Fluid Science, 33, pp. 838-851, (2009)
  • [5] Kiwata T., Kimura S., Komatsu N., Murata H., Kim Y.H., Flow characteristics of a plane jet with an extended lip-plate and serrated tabs, Journal of Fluid Science and Technology, 4, 2, pp. 268-278, (2009)
  • [6] Deo R.C., Mi J., Nathan G.J., The influence of nozzle-exit geometric profile on statistical properties of a turbulent plane jet, Experimental Thermal and Fluid Science, 32, 2, pp. 545-559, (2007)
  • [7] Chua L.P., Yu S.C.M., Wang X.K., Flow visualization and measurements of a square jet with mixing tabs, Experimental Thermal and Fluid Science, 27, 6, pp. 731-744, (2003)
  • [8] Arokkiaswamy A., Verma S.B., Venkateswaran, Effect of tab geometry on the development of a jet issuing from a rectangular jet, Journal of Turbo Jet-Engines, 29, pp. 49-57, (2012)
  • [9] Rajagopalan S., Antonia R.A., Turbulence reduction in the mixing layer of a plane jet using small cylinder, Experiments in Fluids, 25, pp. 96-193, (1998)
  • [10] Merati P., Adrian R.J., The interaction between a plane shear layer and a slender body, Journal of Heat and Fluid Flow, 12, pp. 315-322, (1991)
12