Creep Behavior and Constitutive Equation of 3003 Aluminum Alloy

被引：0

作者：

Liu X. ^{[1
]}

Pan Y. ^{[1
]}

Lu T. ^{[1
]}

Tang Z. ^{[1
]}

He W. ^{[1
]}

机构：

[1] Jiangsu Key Laboratory for Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University, Nanjing

来源：

Pan, Ye (panye@seu.edu.cn) | 2018年 / Cailiao Daobaoshe/ Materials Review卷 / 32期

关键词：

3003 aluminum alloy; Constitutive equation; Creep; Recrystallization microstructure;

D O I：

10.11896/j.issn.1005-023X.2018.06.030

中图分类号：

学科分类号：

摘要：

Recrystallization microstructure control and creep behaviors of cold rolled 3003 aluminum alloy were studied at temperatures of 175-250℃ and experimental stresses of 25-50 MPa. By adopting the equation of power law creep including elastic modulus normalized stress, the relationship between steady creep strain rate, stress and temperature was achieved. The result indicates that the two-step annealing at 350℃ and 600℃ can produce elongated grains, which are good for creep property. Higher temperature makes the stress contributed more in steady creep at increased strain rate. Results of further analysis of the creep mechanism of the alloy at different temperatures indicate that the creep mechanism of 3003 aluminum alloy differed at different temperatures, i. e., the dislocation glide creep mechanism at 175℃ (n=3.5) and the dislocation climb creep mechanism at 200-250℃ (n=5.1-8.6). By comparative analysis of the simulation and experiment, they are found to be in agreement with the experimental data, revealing that the established creep constitutive equations are suitable for different temperatures and stresses. © 2018, Materials Review Magazine. All right reserved.

引用

页码：1015 / 1019

页数：4

共 17 条

[1]

Miller W.S., Zhuang L., Bottema J., Et al., Recent development in aluminum alloys for the automotive industry, Materials Science and Engineering: A, 280, 1, (2000)

[2]

Zhang Y., Wu J., Qi X., Influence of alloying elements on mechanical properties of Al-Mn-Mg alloys, Material and Heat Treatment, 39, 6, (2010)

[3]

Wang X., Wu J., Hu W., Et al., Effect of Ce on corrosion of 3003 aluminum alloy, Chinese Rare Earths, 38, 1, (2017)

[4]

Kahl S., Ekstrom H.E., Mendoza J., Tensile, fatigue, and creep pro-perties of aluminum heat exchanger tube alloys for temperatures from 293 K to 573 K, Metallurgical and Materials Transactions: A, 45, 2, (2013)

[5]

Northword D.O., Smith I.O., Stress change tests during the steady state creep of aluminum alloy 3004 at 300℃, Materials Science and Engineering, 79, 2, (1986)

[6]

Liu K., Chen X.G., Development of Al-Mn-Mg alloy for applications at elevated temperature via dispersoid strengthening, Material & Design, 84, 5, (2015)

[7]

Chen G., Fu G., Yan W., Et al., Research on hot deformation behavior of 3003 Al alloy, Journal of Plasticity Engineering, 18, 4, (2011)

[8]

Zhang X., Ren Z., Hu L., Et al., Hot deformation behavior of 3003/4004 two-layered aluminum alloy, Rare Metal Materials and Engineering, 45, 10, (2016)

[9]

Tu Y.Y., Qian H., Zhou X.F., Et al., Effect of Sc on the interaction of concurrent precipitation and recrystallization in commercial AA3003 aluminum alloy, Metallurgical and Materials Transactions: A, 45, 4, (2014)

[10]

Humphreys F.J., Hatherly M., Recrystallization and related annealing phenomena, (2004)

← 1 2 →