Analysis of the vortex-elimination device of pump suction passage using high-speed photography

被引：0
|
作者：
Liu, Chao [1 ]
Yang, Fan [1 ]
Zhao, Jun [2 ]
机构：
[1] School of Hydraulic, Energy and Power Engineering, Yangzhou University
[2] Anhui Anzhao Engineering Technical Advisory Services Limited Company
来源：
Liu, C. (liuchao@yzu.edu.cn) | 1600年 / Chinese Society of Agricultural Machinery卷 / 45期
关键词：
High-speed photography; Passage; Pump system; Test; Vortex;
D O I：
10.6041/j.issn.1000-1298.2014.03.011
中图分类号：
学科分类号：
摘要：
In order to solve the problem of bottom-vortex in the cube type suction passage of pump 4 types of vortex-elimination devices were designed based on the vortex tubes intensity conservation theorem. To verify the validity of these devices, the test-rig was set up for experiment and the high-speed photography was applied to the flow pattern of the suction passage with different types of vortex-elimination devices. The bottom vortices in the original passage were captured successfully under different operation conditions. The effects of 4 new vortex-elimination devices on the hydraulic performance of pump system were analyzed based on the energy test. The results show that the new vortex-elimination device can eliminate the bottom vortex, the flow pattern of flare and the hydraulic performance of pump system can be improved.
引用
收藏
页码：61 / 65
页数：4
相关论文
共 14 条
  • [1] Choi J.-W., Choi Y.-D., Kim C.-G., Et al., Flow uniformity in a multi-intake pump sump model, Journal of Mechanical Science and Technology, 24, 7, pp. 1389-1400, (2010)
  • [2] Li H., Chen H., Experimental and numerical investigation of free surface vortex, Journal of Hydrodynamics, 20, 4, pp. 485-491, (2008)
  • [3] Chen Y., Wu C., Ye M., Et al., Hydraulic characteristics of vertical vortex at hydraulic intakes, Journal of Hydrodynamics, 19, 2, pp. 143-149, (2007)
  • [4] Echavez G., McCann E., An experimental study on the free surface vertical vortex, Experiments in Fluids, 33, 3, pp. 414-421, (2002)
  • [5] Liu C., The experimental research on the flow fields in bell-draft inlet casing of axial flow pump, Journal of Jiangsu Agricultural College, 6, 2, pp. 41-47, (1985)
  • [6] Liu C., Jin Y., Zhou J., Et al., Study of internal flow in cube-type bidirection passages of axial-flow pump system by numerical simulation and experiment, Journal of Hydroelectric Engineering, 30, 5, pp. 192-198, (2011)
  • [7] Yamamoto Y., Yoshida T., Application of unsteady flow analysis using the vortex method to the design of pump sumps, 2004 ASME/JSME Pressure Vessels and Piping Conference, (2004)
  • [8] Kim C.G., Choi Y.D., Choi J.W., Et al., A study on the effectivess of an anti vortex device in the sump model by experiment and CFD, 26th IAHR Symposium on Hydraulic Machinery and Systems, (2012)
  • [9] Kawakita K., Matsui J., Isoda H., Experimental study on the similarity of flow in pump sump models, 26th IAHR Symposium on Hydraulic Machinery and Systems, (2012)
  • [10] Arboleda G., El-Fadel M., Effects of approach flow conditions om pump sump design, Journal of Hydraulic Engineering, 122, 9, pp. 489-494, (1996)
12