Synthesis and performance evaluation of bio-derived and synthetic carbon as lithium-sulfur battery cathode

The next-generation of batteries need be both energy dense and environment friendly. Lithium sulfur batteries (LSBs) satisfy both criteria but their practical implementation is marred by the highly resistive nature of sulfur. Carbon-based cathodes play a vital role in mitigating the issue because their high conductivity allows for effective electron transfer during electrochemical cycling. Synthesis and electrochemical evaluation of carbon-based cathodes from two different sources for LSBs was carried out. Herein, two kinds of carbon, namely bio-derived carbon from coconut shells (CC500) and N-doped carbon (NC) from polyacrylonitrile fibers were synthesized and sulfur was incorporated via the melt diffusion route. The composites are characterized by PXRD and TGA, which determined 80 wt% mass loading of sulfur. The higher intensity of G-band over D-band in Raman spectroscopy indicates greater graphitic character for CC500 compared to NC. SEM images show large macro-pore like tunnels in CC500 while NC appears are irregular chunks. EDAX spectra showed 20 wt% N content in NC while CC500 is largely carbon with some minor surface oxygen. In galvanostatic charge-discharge cycling of coin cells, bare CC500/S shows better specific capacity compared to NC/S samples but the trend flips once a separator modified with 4 mg of graphene oxide (GO) is introduced (indicated as NC/S/GO4 and CC500/S/GO4). This points towards synergy between N-doped carbon and GO layer in retaining the soluble polysulfides in the catholyte region. NC/S/GO4 exhibited better capacity i.e., 1453, 1024, 866, 787, 697 mAh/g versus 1016, 779, 672, 551, 441 mAh/g offered by CC500/S/GO4 when discharged at 50, 100, 200, 300 and 500 mA/g, respectively.