Expert material selection for manufacturing of green bio composites

被引：14

作者：

Ahmed Ali B.A. ^{[1
]}

Sapuan S.M. ^{[1
,2
,3
]}

Jawaid M. ^{[2
]}

Sanyang M.L. ^{[2
]}

机构：

[1] Institute of Advanced Technology, Universiti Putra Malaysia, UPM, Serdang, 43400, Selangor

[2] Laboratory of Biocomposite Technology, Institute of Tropical Forestry and Forest Products, Universiti Putra Malaysia, UPM, Serdang, 43400, Selangor

[3] Department of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia, Serdang, 43400, Selangor

来源：

Green Energy and Technology | 2017年 / 0卷 / 9783319466095期

关键词：

Automotive; Bio composites; Expert system; Manufacturing; Material selection; Sustainability;

D O I：

10.1007/978-3-319-46610-1_1

中图分类号：

学科分类号：

摘要：

The innovation in material science reveals more materials day by day and the material database grows exponentially. The conventional material selection systems fail to handle this large material database. The explosion all over the world is increasingly using the computing power to solve complex problems. Accordingly, it is applied in the field of engineering to obtain an optimum solution. The Expert System is a computer application that emulates the decision-making ability of a human expert for a specific task. This chapter presents a brief perception of implementing the expert systems for material selection of green bio composites. Due to the increasing ecological problem the synthetic materials are being reduced in the manufacturing industry and replaced by so called “bio composite” materials. The bio composites have different fibre orientations, matrices and constitutions would result in diverse characteristics in physical, mechanical, thermal and environmental properties. These dissimilar attributes of bio composites would increase the challenges for the material selection process. Hence, few case studies with automotive interior components are discussed for better understanding and to show the implementation of the expert system for the material selection of green bio composites. The result shows that these expert system has dramatically advanced the material selection to enforce green technology and sustainability in manufacturing and design. © Springer International Publishing AG 2017.

引用

页码：1 / 12

页数：11

共 29 条

[1]

Aji I.S., Sapuan S.M., Zainudin E.S., Abdan K., Kenaf fibres as reinforcement for polymeric composites: A review, Int J Mech Mater Eng, 4, 3, pp. 239-248, (2009)

[2]

Ashby M.F., Materials Selection in Mechanical Design, (2005)

[3]

Bachtiar D., Mechanical Properties of Alkali-Treated Sugar Palm (Arengapinnata) Fibre-Reinforced Epoxy Composites, (2008)

[4]

Djassemi M., A computer-based approach to material and process selection using sustainability and ecological criteria, J Manuf Technol Manage, 20, pp. 975-988, (2009)

[5]

El-Shekeil Y.A., Sapuan S.M., Khalina A., Zainudin E.S., Al-Shuja'a O.M., Effect of alkali treatment on mechanical and thermal properties of Kenaffiber-reinforced thermoplastic polyurethane composite, J Thermal Anal Calorim, 109, 3, pp. 1435-1443, (2012)

[6]

Grassie N., Scott G., Polymer Degradation and Stabilisation, (1988)

[7]

Hambali A., Sapuan S.M., Ismail N., Nukman Y., Material selection of the polymeric composite automotive bumper beam using analytical hierarchy process, J Central South Univ Technol, 17, pp. 244-256, (2010)

[8]

Ishak M.R., Leman Z., Sapuan S.M., Rahman M., Anwar U., Effects of impregnation time on physical and tensile properties of impregnated sugar palm (Arengapinnata) fibres, Key Eng Mater, 471, pp. 1147-1152, (2011)

[9]

Jahan A., Yusof Ismail M., Faizal M., Sapuan S.M., Material selection based on ordinal data, Mater Des, 31, pp. 3180-3187, (2010)

[10]

Lan Y., Guan Z., Jiao Q., Xu G., A web-based computer-aided material-selection system for aircraft design, J Comput, 6, 5, pp. 976-983, (2011)

← 1 2 3 →