Effect of Microsecond Pulsed Electric Field Strength on the BNNSs Orientation Degree and the Thermal Conductivity of Epoxy Resin Composites

被引：0
作者：
Mi Y. [1 ]
Ge X. [1 ]
Liu L. [1 ,2 ]
Gou J. [1 ,3 ]
Dai J. [1 ]
机构：
[1] State Key Laboratory of Power Transmission Equipment & System Security and New Technology, Chongqing University, Chongqing
[2] State Grid Zhenjiang Power Supply Company, Zhenjiang
[3] Technical Center of Chongqing Chuanyi Automation Co. Ltd, Chongqing
来源：
Diangong Jishu Xuebao/Transactions of China Electrotechnical Society | 2022年 / 37卷 / 06期
关键词：
Boron nitride nanosheets; Epoxy resin; Microsecond pulsed electric field; Orientation; Thermal conductivity;
D O I：
10.19595/j.cnki.1000-6753.tces.200927
中图分类号：
学科分类号：
摘要：
The pulsed electric field can induce the orientation and arrangement of the insulating and high thermal conductivity filler in the matrix, so that it forms an efficient heat conduction network in the direction of heat flow, which can improve the thermal conductivity of the composite material effectively. However, the influence rule of electric field strength is not clear. Therefore, this paper used the microsecond pulsed electric field to induce the orientation arrangement of boron nitride nanosheets (BNNSs), and investigated the effects of different pulsed electric field strengths on the BNNSs orientation degree and the thermal conductivity of composite materials. Additionally, the corresponding mechanism of the electric field strength on the BNNSs orientation degree and the thermal conductivity of the composites was analyzed based on the forces experienced by the BNNSs during curing. The results show that under the strength of 12kV/mm, the average orientation angle of BNNSs reaches 75.56°, and the thermal conductivity of the composite material is increased to 2.6 times that of pure epoxy resin. Both the BNNSs orientation degree and the thermal conductivity of composite materials increase with the increase of electric field strength, but the influence is not completely consistent. Under higher strength, the orientation of fillers tends to be saturated, but the increase in the thermal conductivity does not appear to be saturated. In general, this study is a preliminary exploration of microsecond pulse-induced filler orientation to improve the thermal conductivity of composites, and can provide guidance for the preparation of high thermal conductivity composites at low loadings. © 2022, Electrical Technology Press Co. Ltd. All right reserved.
引用
收藏
页码：1533 / 1541
页数：8
相关论文
共 28 条
  • [21] Mi Yan, Gui Lu, Deng Shengchu, Et al., Development of modular bipolar solid-state exponential decay pulse voltage source, High Voltage Engineering, 45, 11, pp. 3721-3729, (2019)
  • [22] Shen Heng, Guo Jing, Wang Hao, Et al., Bioinspired modification of h-BN for high thermal conductive composite films with aligned structure, ACS Applied Materials & Interfaces, 7, 10, pp. 5701-5708, (2015)
  • [23] Wang Xiongwei, Wu Peiyi, Preparation of highly thermally conductive polymer composite at low filler content via a self-assembly process between polystyrene microspheres and boron nitride nano-sheets, ACS Applied Materials & Interfaces, 9, 23, pp. 19934-19944, (2017)
  • [24] Tahashi M, Ishihara M, Sassa K, Et al., Control of crystal orientation in deposited films of bismuth vaporized in laser and resistance heating methods under a high magnetic field, Materials Transactions, 44, 2, pp. 285-289, (2003)
  • [25] Wang Haiquan, Chen Guohua, Review on the orientation and alignment of particles induced by electric field, Journal of Huaqiao University (Natural Science), 29, 4, pp. 490-494, (2008)
  • [26] Kim G, Shkel Y., Polymeric composites tailored by electric field, Journal of Materials Research, 19, 4, pp. 1164-1174, (2004)
  • [27] Gast A P, Zukoski C F., Electrorheological fluids as colloidal suspensions, Advances in Colloid and Interface Science, 30, 3-4, pp. 153-202, (1989)
  • [28] Cho H, Nakayama T, Suematsu H, Et al., Insulating polymer nanocomposites with high-thermal-conduction routes via linear densely packed boron nitride nanosheets, Composites Science and Technology, 129, pp. 205-213, (2016)
123