Influence of air void content of polymer modified cement mortar on mechanical properties

被引：0
作者：
Sun, Zhen-Ping [1 ]
Ye, Dan-Mei [1 ]
Fu, Le-Feng [2 ]
Zheng, Bo-Cun [2 ]
Feng, Zhong-Jun [2 ]
Xie, Hui-Dong [3 ]
机构：
[1] Key Laboratory of Advanced Civil Engineering Materials of Ministry of Education, Tongji University
[2] Shanghai Sunrise Chemical Co. Ltd.
[3] Shandong Huasen Concrete Co. Ltd.
来源：
Sun, Z.-P. (szhp@tongji.edu.cn) | 1600年 / Tongji University卷 / 16期
关键词：
Air void content; Bulk density; Mechanical property; Polymer;
D O I：
10.3969/j.issn.1007-9629.2013.04.001
中图分类号：
学科分类号：
摘要：
Influence of air void content of polyacrylic ester latex(VIVID400), polyvinyl acetate-ethylene latex(CP149) and styrene-butadiene latex(SD623) modified cement mortar was investigated with fixed flow value. The research shows that bulk density of fresh mortar decreases due to air entrainment of polymer latex, but increases with increasing dosage of defoamer to varying degrees. The flexural strength and compressive strength of polymerized mortar increase with the increasing of dosage of deformer. The tensile bond strength of VIVID400 modified mortar increases at first, then decreases with the lower air void content, probably because of the influence of the defoamer on the micro pore structure of the mortar.
引用
收藏
页码：561 / 566
页数：5
相关论文
共 12 条
  • [1] Cao T.-Y., Liu Q.-P., Hu J.-S., Synthesis Principle, Performance and Application of Polymer Emulsion, pp. 677-693, (2007)
  • [2] Zhong S.-Y., Yuan H., Application of Polymer in Concrete, pp. 108-271, (2003)
  • [3] Xu F., Liu L.-J., Polymer Cement-Based Materials and Applications, pp. 36-142, (2010)
  • [4] Sun W., Wang W.-G., Gao G., Repairing the bad concrete of bridge in chloride environment by using mortar C-mik, Shanxi Architecture, 35, 25, pp. 309-310, (2009)
  • [5] Cai S.-H., Tang L.-F., Research on the application of polymer cement mortar in concrete repair, Journal of Yangtze River Scientific Research Institute, 24, 7, pp. 44-48, (2007)
  • [6] Wang R., Wang P.-M., Application of polyacrylic ester latex to cement mortar, Journal of the Chinese Ceramic Society, 36, 7, pp. 946-949, (2008)
  • [7] Zheng W., Wang P.-M., Zhang G.-F., Influence of polymer powder on air content and bulk density of cement mortar, The Proceedings of the First National Academic Conference of Commercial Mortars, pp. 267-271, (2005)
  • [8] Li F., Yang Y.-Y., Qin F., Study on physcial properties of styrene-butadiene emulsion modified cement mortar, Journal of Materials Science and Engineering, 22, 2, pp. 254-258, (2004)
  • [9] Li J., Wang P.-M., Wang R., Mechanical properties and bulk density of styrene-butadiene copolymer emulsion(SD622s) modified cement mortar, Journal of Building Materials, 8, 6, pp. 705-709, (2005)
  • [10] Ye D.-M., Sun Z.-P., Fu L.-F., Et al., Study onproperties of polyacrylic ester latex modified cement mortar, The Proceedings of the Fourth National Academic Conference of Commercial Mortars, pp. 69-76, (2011)
12