Coaxial positioning system based on flexible decoupling beams and micro-vision

被引：2

作者：

Chen T. ^{[1
,2
]}

Chen L.-G. ^{[1
]}

Pan M.-Q. ^{[1
]}

Sun L.-N. ^{[3
]}

机构：

[1] Robotics and Microsystem Center, Soochow University

[2] State Key Laboratory of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences

[3] Robotics Institute, Harbin Institute of Technology

来源：

Guangxue Jingmi Gongcheng/Optics and Precision Engineering | 2011年 / 19卷 / 11期

关键词：

Coaxial positioning; Flexible decoupling beam; Micro-vision;

D O I：

10.3788/OPE.20111911.2685

中图分类号：

学科分类号：

摘要：

According to the requirement of the assembly of a shaft and a sleeve for coaxiality, a coaxial positioning system was presented based on the flexible decoupling beams and micro-vision technology. To implement the online adjustments and maintain posture of the shaft and the sleeve, a flexible beam structure with a square pattern and two degrees of freedom was designed. Combined with a micro-platform and a clamp, this structure has achieved an exact coaxial precision in the positioning. According to mechanics, a stiffness model of the flexible beam was established. Then the parameters of the beams were determined by a simulation in finite element method. A micro-vision system was designed to be used in the system. Through the Hough algorithm, the precise coaxial positioning of the real-time detection was realized and the coaxial deviation computed was used as the value of the adjustment. Through lots of coaxial experiments, it shows that the coaxial positioning accuracy has been less than 8 μm. The results indicate that the positioning device can provide precise positioning of parameters, and can guarantee the realization of positioning assembly.

引用

页码：2685 / 2692

页数：7

共 7 条

[1]

Liu D.X., Sun F.Z., Huang X.L., Method of computer-aided selection for the aviation precision coupling assembly, Machinery, 32, 6, pp. 80-82, (2010)

[2]

Allegro S., Chanel C., Jacot J., Autofocus for automated microassembly under a microscope, Image Processing, 2, pp. 677-680, (1996)

[3]

Sun L.N., Chen L.G., Liu P.K., Et al., Some issues on the micro-vision system for a micromanipulation robot, Opt. Precision Eng., 10, 2, pp. 171-175, (2002)

[4]

Duan R.L., Duan H.B., Li Q.X., Et al., Micro-assembly autofocusing system based on image processing, Opt. Precision Eng., 14, 3, pp. 468-472, (2006)

[5]

Wang Y.W., Liu X.L., Xie H., A wavelet based focus measure and 3D autofocusing for microscope images, Opt. Precision Eng., 14, 6, pp. 1063-1069, (2006)

[6]

Liu X.Y., Wang W.H., Sun Y., Autofocusing for automated microscopic evaluation of blood smear and pap smear, Engineering in Medicine and Biology Society, pp. 4718-4721, (2006)

[7]

Chen L.G., Wang M.Y., Yang Z.L., Et al., Fast autofocus method for microscopic computer vision, Opt. Precision Eng., 18, 6, pp. 1361-1366, (2010)

← 1 →