Hydrodynamic behavior of silicon particles with a wide size distribution in a draft tube spout-fluid bed

被引:0
|
作者
Zhang, Yuemei [1 ]
Huang, Guoqiang [1 ]
Su, Guoliang [1 ]
机构
[1] School of Chemical Engineering and Technology, Tianjin University, Tianjin,300072, China
关键词
D O I
暂无
中图分类号
学科分类号
摘要
An experimental study on the hydrodynamic behavior of silicon particles with a wide size distribution in a draft tube spout-fluid bed was performed in a 182 diameter cylindrical column with a flat gas distributor. Effects of spouting and fluidizing gas velocity, static bed height, entrainment zone height and draft tube diameter on the maximum spouting pressure drop, minimum stable spouting velocity and solids circulation rate were investigated. The results show that the maximum spouting pressure drop increases with static bed height, entrainment zone height, draft tube diameter and fluidizing gas velocity. The minimum spouting velocity increases with entrainment zone height, while it decreases with static bed height, draft tube diameter and fluidizing gas velocity. Two correlations on the maximum pressure drop and minimum spouting velocity are proposed respectively based on the experimental data, which are in good agreement with the present experiments. In addition, the solids circulation rate increases with static bed height, draft tube diameter, fluidizing and spouting gas velocity. It also increases with entrainment zone height at a lower fluidizing gas velocity, however it decreases with entrainment zone height at a higher fluidizing gas velocity. © 2017 Elsevier B.V.
引用
收藏
页码:645 / 653
相关论文
共 50 条
  • [31] Magnetic resonance velocimetry of particle hydrodynamics in a three-dimensional draft tube spout-fluid bed
    Metzger, Jens P.
    Chen, Boyuan
    Penn, Alexander
    Guenthner, Christian
    Pruessmann, Klaas P.
    Müller, Christoph R.
    Chemical Engineering Journal, 1600, 485
  • [32] SOLIDS CIRCULATION IN A SPOUT FLUID BED WITH DRAFT TUBE
    BERRUTI, F
    MUIR, JR
    BEHIE, LA
    CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 1988, 66 (06): : 919 - 923
  • [33] New Type of Draft Tube Spout-Fluid Bed. Part 1: Hydraulic Transport of 1.94 mm Glass Particles in Water
    Littman, Howard
    Paccione, John D.
    Plawsky, Joel L.
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2009, 48 (20) : 9286 - 9298
  • [34] Modeling of particle velocities in an apparatus with a draft tube operating in a fast circulating dilute spout-fluid bed regime
    Ludwig, Wojciech
    Zajac, Daniel
    POWDER TECHNOLOGY, 2017, 319 : 332 - 345
  • [35] Hydrodynamic characteristics of spout-fluid bed: Pressure drop and minimum spouting/spout-fluidizing velocity
    Zhong, WQ
    Chen, XP
    Zhang, MY
    CHEMICAL ENGINEERING JOURNAL, 2006, 118 (1-2) : 37 - 46
  • [36] Mixing and Segregation Behavior in a Spout-Fluid Bed: Effect of the Particle Density
    Zhang, Yong
    Zhong, Wenqi
    Jin, Baosheng
    Xiao, Rui
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2013, 52 (15) : 5489 - 5497
  • [37] Hydrodynamic characteristics of spout-fluid bed: Pressure drop and minimum spouting/spout-fluidizing velocity
    Zhong, Wenqi
    Chen, Xiaoping
    Zhang, Mingyao
    Chemical Engineering Journal, 2006, 118 (1-2): : 37 - 46
  • [38] Design, simulation, and performance of a draft tube spout fluid bed coating system for aerogel particles
    Plawsky, J. L.
    Littman, H.
    Paccione, J. D.
    POWDER TECHNOLOGY, 2010, 199 (02) : 131 - 138
  • [39] Characterization of flow properties of pharmaceutical pellets in draft tube conical spout-fluid beds
    Foroughi-Dahr, Mohammad
    Sotudeh-Gharebagh, Rahmat
    Mostoufi, Navid
    JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY, 2018, 68 : 274 - 281
  • [40] Effect of the annulus aeration on annulus leakage and particle circulation in a three-phase spout-fluid bed with a draft tube
    Erbil, AÇ
    POWDER TECHNOLOGY, 2006, 162 (01) : 38 - 49