Validation of a simplified model for estimating overhead conductor temperatures under dynamic line ratings: Comparison with the CIGRE model

被引：2

作者：

Ngoko B. ^{[1
]}

Sugihara H. ^{[1
]}

Funaki T. ^{[1
]}

机构：

[1] Division of Electrical, Electronic and Information Engineering, Osaka University, 2-1, Yamadaoka, Suita

来源：

IEEJ Transactions on Power and Energy | 2018年 / 138卷 / 04期

关键词：

Conductor temperature calculation; Dynamic line rating; Heat balance equation;

D O I：

10.1541/ieejpes.138.284

中图分类号：

学科分类号：

摘要：

Increases in the proportion of variable renewable energy sources (var-RES) in electrical power networks are accompanied by increased fluctuations in the conductor currents and an increased risk of conductors exceeding their thermal ratings. Dynamic line ratings, which use real-time loading and weather information to continuously adjust the thermal ratings of conductors, are one of the measures that has been applied to increase the loadability while addressing the challenges caused by increased current fluctuations. However, the mathematical models that have been developed based on the empirically observed conductor thermal dynamics show that the relationships between the conductor temperature and both the current and ambient weather conditions are nonlinear. This makes it difficult to incorporate the conductor electro-thermal characteristics when specifying the line ratings. This paper presents numerical approximations of the various components used in the International Council on Large Electric Systems (CIGRE) physical model in order to simplify estimations of the temperature of overhead conductors under dynamic line ratings regimes. The resulting simple equations can be used to directly estimate the conductor temperature without the need for iterative calculations, which are required in the full CIGRE model. Comparisons between the simplified model and the full CIGRE model are provided for validation purposes. © 2018 The Institute of Electrical Engineers of Japan.

引用

页码：284 / 296

页数：12

共 31 条

[1]

Ueda Y., Kurokawa K., Tanabe T., Kitamura K., Sugihara H., Analysis results of output power loss due to the grid voltage rise in grid-connected photovoltaic power generation systems, IEEE Trans. Industr. Electron., 55, 7, pp. 2744-2751, (2008)

[2]

Denholm P., Hand M., Grid flexibility and storage required to achieve very high penetration of variable renewable electricity, Energy Policy, 39, 3, pp. 1817-1830, (2011)

[3]

Eftekharnejad S., Vittal V., Heydt G.T., Keel B., Loehr J., Impact of increased penetration of photovoltaic generation on power systems, IEEE Trans. Power Syst., 28, 2, pp. 893-901, (2013)

[4]

Cheng D., Mather B.A., Seguin R., Hambrick J., Broadwater R.P., Photovoltaic (PV) impact assessment for very high penetration levels, IEEE J. Photovoltaics, 6, 1, pp. 295-300, (2016)

[5]

Schlapfer M., Mancarella P., Probabilistic modeling and simulation of transmission line temperatures under fluctuating power flows, IEEE Trans. Power Delivery, 26, 4, pp. 2235-2243, (2011)

[6]

Xu B., Ulbig A., Andersson G., Impacts of dynamic line rating on power dispatch performance and grid integration of renewable energy sources, Innovative Smart Grid Technologies Europe (ISGT Europe), 2013 4th IEEE/PES, pp. 1-5, (2013)

[7]

Foss S.D., Maraio R.A., Dynamic line rating in the operating environment, IEEE Trans. Power Delivery, 5, 2, pp. 1095-1105, (1990)

[8]

Douglass D.A., Weather-dependent versus static thermal line ratings [power overhead lines], IEEE Trans. Power Delivery, 3, 2, pp. 742-753, (1988)

[9]

Santos J.R., Exposito A.G., Sanchez F.P., Assessment of conductor thermal models for grid studies, IET Generation, Transmission Distribution, 1, 1, pp. 155-161, (2007)

[10]

Krontiris T., Wasserrab A., Balzer G., Weather-based loading of overhead lines - Consideration of conductor's heat capacity, Modern Electric Power Systems (MEPS), 2010 Proc. of the International Symposium, pp. 1-8, (2010)

← 1 2 3 4 →