Application of borehole transient electromagnetic method in detection of floor failure depth in fully mechanized top coal caving face

被引：0
|
作者：
Wang C. [1 ]
An Y. [1 ]
Zhu H. [1 ]
Guo J. [1 ]
机构：
[1] Xi’an Research Institute Co. Ltd., China Coal Technology and Engineering Group Corp., Xi’an
来源：
Meitiandizhi Yu Kantan/Coal Geology and Exploration | 2022年 / 50卷 / 07期
关键词：
electrical damage layer; floor failure depth; subsection water pressure test; transient electromagnetic method in hole;
D O I：
10.12363/issn.1001-1986.21.12.0862
中图分类号：
学科分类号：
摘要：
The carboniferous-Permian No. 6 coal seam in the eastern Jungar Coalfield of Ordos Basin is an extra-thick coal seam, and the coal floor is particularly threatened by the Ordovician limestone aquifer. The mining effect will lead to the formation of the bottom mining damage zone, and new water-conducting channels may be formed, which in turn will cause sudden water disasters. Aiming at the testing problem of floor mining failure zone, the method of transient electromagnetic method in hole with moving source and receiving is proposed to obtain resistivity characteristic data of strata from floor drilling before and after mining. Firstly, the resistivity difference of the TEM method in the complete and two-layer rock model is compared by numerical simulation, and the proposed method has a good resolution for the two-layer rock model. We conducted a test at the fully mechanized top coal caving face 6119 extra-thick coal seam in Jungar coalfield, and obtained the bottom damage depth by probing the bottom electrical difference layer, and the results were verified to be accurate and reliable. The research shows that the more accurate floor failure depth can be obtained by comparing the results of pre-mining and post-mining, which provides a new method for testing the failure depth of working face under similar conditions. © 2022 Science Press. All right reserved.
引用
收藏
页码：79 / 84
页数：5
相关论文
共 24 条
  • [1] HU Weiyue, Study orientation and present status of geological guarantee technologies to deep mine coal mining[J], Coal Science and Technology, 41, 8, (2013)
  • [2] HE Manchao, Research progress of deep shaft construction mechanics[J], Journal of China Coal Society, 46, 3, pp. 726-746, (2021)
  • [3] JING Zigang, LI Baiying, Preliminary discussion on mechanism of water inrush from coal floor[J], Coal Geology & Exploration, 8, 2, pp. 51-56, (1980)
  • [4] YANG Shan'an, Water resistance coefficient”and its application[J], Coal Geology & Exploration, 14, 3, pp. 41-46, (1986)
  • [5] LIU Zongcai, YU Hong, Lower three Zones”theory and mechanism of floor water inrush[J], Coal Geology of China, 3, 2, (1991)
  • [6] WANG Zuoyu, LIU Hongquan, Investigation in floor−water− burst mechanism[J], Coal Geology & Exploration, 19, 1, (1989)
  • [7] DONG Shuning, WANG Hao, ZHANG Wenzhong, Judgement criteria with utilization and grouting reconstruction of top Ordovician limestone and floor damage depth in North China coal field[J], Journal of China Coal Society, 44, 7, pp. 2216-2226, (2019)
  • [8] WANG Houzhu, JU Yuanjiang, QIN Kunkun, Et al., A comparative study on floor failure law in deep and short−distance coal seam mining[J], Journal of Mining & Safety Engineering, 37, 3, pp. 553-561, (2020)
  • [9] ZHANG Jincai, LIU Tianquan, On depth of fissured zone in seam floor resulted from coal extraction and its distribution characteristics[J], Journal of China Coal Society, 15, 2, (1990)
  • [10] ZHANG Pingsong, SUN Binyang, Development status of the detection technology for coal−seam stope floor damage[J], Advances in Earth Science, 32, 6, pp. 577-588, (2017)
123