Non-even wire tension in high-speed wire electricaldischarge machining

被引：0
|
作者：
20145100331862
机构：
[1] Lingling, Li
[2] Zhidong, Liu
[3] Xiefeng, Li
[4] Mingming, Li
来源：
Zhidong, Liu | 1600年 / Springer London卷 / 78期
关键词：
This paper reports a study and analysis of non-even wire tension in high-speed wire electrical discharge machining (HSWEDM). This problem has been a challenge since HSWEDM was invented. The tensions of the wire electrode at both ends of a wire-winding cylinder become inconsistent when the wire electrode continues discharging for a certain period. Studies have suggested that the amount of dielectric fluid added into the discharging gap differs depending on the positive and negative moving directions of the electrode. The resistances experienced by the electrode differ because of the discharging explosion. Meanwhile; the elongations of the electrode differ according to positive and negative moving directions. Therefore; tensions are inconsistent; and non-even wire tension occurs. Factors that affect non-even wire tension are studied; and a new mode of variable wire speed reciprocating WEDM is designed. Experiments show that the machining effects in the new mode are better than those in the traditional mode under the same cutting conditions. Processing accuracy; surface quality; and cutting speed are increased. Moreover; the service life of the electrode is extended three times or more with the new mode compared with that in the traditional mode. © 2014; Springer-Verlag London;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：1 / 4
相关论文
共 50 条
  • [21] Study on high-efficiency cutting of high-thickness workpiece with stranded wire electrode in high-speed wire electrical discharge machining
    Ji, Yichao
    Liu, Zhidong
    Deng, Cong
    Fang, Laijiu
    Qiu, Mingbo
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 100 (1-4): : 973 - 982
  • [22] High-Speed Wire Electrical Discharge Machining of Insulating Zirconia with a Novel Assisting Electrode
    Guo, Yongfeng
    Hou, Pengju
    Shao, Dongxiang
    Li, Zongfeng
    Wang, Li
    Tang, Lin
    MATERIALS AND MANUFACTURING PROCESSES, 2014, 29 (05) : 526 - 531
  • [23] Study on the influence that hard water had in high-speed wire electrical discharge machining
    Zhang, Yanbin
    Liu, Zhidong
    Zhang, Ming
    Qiu, Mingbo
    Zhang, Hao
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 104 (1-4): : 1251 - 1258
  • [24] Study on the influence that hard water had in high-speed wire electrical discharge machining
    Yanbin Zhang
    Zhidong Liu
    Ming Zhang
    Mingbo Qiu
    Hao Zhang
    The International Journal of Advanced Manufacturing Technology, 2019, 104 : 1251 - 1258
  • [25] Study on the influence that hard water had in high-speed wire electrical discharge machining
    Zhang, Yanbin
    Liu, Zhidong
    Zhang, Ming
    Qiu, Mingbo
    Zhang, Hao
    International Journal of Advanced Manufacturing Technology, 2019, 104 (1-4): : 1251 - 1258
  • [26] Study on Hardness and Tribological Properties of High-speed Wire Electrical Discharge Machining Surface
    Xu, Jinkai
    Xia, Kui
    Xu, Zhe
    Zhang, Linshuai
    Yu, Zhanjiang
    Yu, Huadong
    2015 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION, 2015, : 2537 - 2541
  • [27] Efficient separation with high-speed wire EDM
    Oswald, Kai
    Galvanotechnik, 2019, 110 (07): : 1235 - 1240
  • [28] HIGH-SPEED CUTOFF OF WIRE, BARS, RODS
    不详
    PRODUCTION ENGINEERING, 1983, 30 (04): : 21 - 22
  • [29] PREDICTING FRACTURE IN HIGH-SPEED WIRE DRAWING
    MAKSIMOV, SB
    OSTSEMIN, AA
    MAKSIMOVA, LV
    STRENGTH OF MATERIALS, 1981, 13 (10) : 1271 - 1276
  • [30] High-Speed Wire Rod Finishing Mill
    China's Foreign Trade, 1997, (11) : 37 - 37
12345