Non-even wire tension in high-speed wire electricaldischarge machining

被引：0
|
作者：
20145100331862
机构：
[1] Lingling, Li
[2] Zhidong, Liu
[3] Xiefeng, Li
[4] Mingming, Li
来源：
Zhidong, Liu | 1600年 / Springer London卷 / 78期
关键词：
This paper reports a study and analysis of non-even wire tension in high-speed wire electrical discharge machining (HSWEDM). This problem has been a challenge since HSWEDM was invented. The tensions of the wire electrode at both ends of a wire-winding cylinder become inconsistent when the wire electrode continues discharging for a certain period. Studies have suggested that the amount of dielectric fluid added into the discharging gap differs depending on the positive and negative moving directions of the electrode. The resistances experienced by the electrode differ because of the discharging explosion. Meanwhile; the elongations of the electrode differ according to positive and negative moving directions. Therefore; tensions are inconsistent; and non-even wire tension occurs. Factors that affect non-even wire tension are studied; and a new mode of variable wire speed reciprocating WEDM is designed. Experiments show that the machining effects in the new mode are better than those in the traditional mode under the same cutting conditions. Processing accuracy; surface quality; and cutting speed are increased. Moreover; the service life of the electrode is extended three times or more with the new mode compared with that in the traditional mode. © 2014; Springer-Verlag London;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：1 / 4
相关论文
共 50 条
  • [1] Non-even wire tension in high-speed wire electricaldischarge machining
    Li Lingling
    Liu Zhidong
    Li Xiefeng
    Li Mingming
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 78 (1-4): : 503 - 510
  • [2] Non-even wire tension in high-speed wire electricaldischarge machining
    Li Lingling
    Liu Zhidong
    Li Xiefeng
    Li Mingming
    The International Journal of Advanced Manufacturing Technology, 2015, 78 : 503 - 510
  • [3] Wire tension in high-speed wire electrical discharge machining
    Shi Wentai
    Liu Zhidong
    Qiu Mingbong
    Tian Zongjun
    The International Journal of Advanced Manufacturing Technology, 2016, 82 : 379 - 389
  • [4] Wire tension in high-speed wire electrical discharge machining
    Shi Wentai
    Liu Zhidong
    Qiu Mingbong
    Tian Zongjun
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 82 (1-4): : 379 - 389
  • [5] Simulation and experimental study of wire tension in high-speed wire electrical discharge machining
    Shi, Wentai
    Liu, Zhidong
    Qiu, Mingbo
    Tian, Zongjun
    Yan, Hao
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2016, 229 : 722 - 728
  • [6] Development of high-speed electrode wire for wire electro-discharge machining
    Otsuka, Y.
    Nakai, Y.
    Numano, M.
    Maruyama, T.
    Ohkubo, N.
    Kishida, H.
    SEI Technical Review, 2001, (51): : 133 - 136
  • [7] Interelectrode discharge mechanism in high-speed wire electrical discharge machining
    Zhang Yueqin
    Liu Zhidong
    Xia Lixia
    Wang Wei
    The International Journal of Advanced Manufacturing Technology, 2016, 84 : 2637 - 2647
  • [8] Wire electrical discharge machining applied to high-speed rotating workpieces
    Weingaertner, Eduardo
    Wegener, Konrad
    Kuster, Friedrich
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2012, 212 (06) : 1298 - 1304
  • [9] Super-high-thickness high-speed wire electrical discharge machining
    Chengrang Li
    Zhidong Liu
    Laijiu Fang
    Hongwei Pan
    Mingbo Qiu
    The International Journal of Advanced Manufacturing Technology, 2018, 95 : 1805 - 1818
  • [10] HIGH-SPEED WIRE DRAWING
    CAMENSCHI, G
    CRISTESCU, N
    SANDRU, N
    ARCHIVES OF MECHANICS, 1979, 31 (05): : 741 - 755
12345