Eco-friendly high microporosity low temperature plasma exposed activated carbon from coconut shell for nano hybrid supercapacitors

This study looked at the structural, chemical, and electrochemical properties of coconut shell activated carbon (CSAC) before and after plasma treatment. Structural analysis using x-ray diffraction (XRD) demonstrated that plasma treatment improves graphitic structure by plans at (002) and (101) for higher angles. Chemical investigation utilizing Fourier-transform infrared spectroscopy (FTIR) revealed an increase in hydroxyl groups and carboxylic content following plasma treatment, which enhances electrochemical performance. Raman spectroscopy revealed a drop in the ID/IG ratio from 1.00 to 0.90, indicating enhanced graphitic order. Scanning electron microscopy (FESEM) showed that plasma treatment improves surface shape, while elemental analysis assessed the high carbon content (76.56% by weight). Contact angle measurements showed a decrease from 114 degrees to 65 degrees, showing improved hydrophilicity after treatment. Electrochemical investigation shows that the plasma-treated CSAC had a maximum specific capacitance of 1612 F g(-1), compared to 729 F g(-1) for the untreated CSAC, and a total capacitance of plasma treated1685 F/g are untreated 1400 F g(-1). A Type II+III pattern on the isotherms implied capillary condensation in mesopores. The plasma treatment indicated improved porosity and potential adsorption capacity by increasing the specific surface area and decreasing the average pore width. The cyclic stability tests indicated that the plasma-treated CSAC retained 94% capacitance and 98% coulombic efficiency after 3000 cycles, which is superior to the untreated CSAC's 92% capacitance retention and 95% coulombic efficiency. This reveals that plasma-treated CSAC has significantly improved performance and stability, making it an excellent alternative for high-performance and cost-effective energy storage applications.