Mechanical properties and parameters optimization of large-scale bearing by finite element simulation

被引：0
|
作者：
Zhang Z. [1 ]
机构：
[1] Dept. of Mech. Engg., Tianjin Vocational College of Mechanics and Electricity, Tianjin
来源：
International Journal of Vehicle Structures and Systems | 2020年 / 11卷 / 04期
关键词：
Channel spacing; Finite element model; Large roller bearing; Mechanical properties;
D O I：
10.4273/ijvss.11.4.09
中图分类号：
学科分类号：
摘要：
The structure of large-scale roller bearing has strong load carrying capacity, so it is often used in the system of low-speed operation. In wind power technology, large-scale bearings are used and its reliability is very important. In this paper, the characteristics of two kinds of bearing structures are analysed and then the finite element model is used to simulate the large-scale roller bearing with the load distribution and size of contact angle under actual working conditions. By constructing several large-scale roller bearing support models, the influence of its structure and hardness on its mechanical properties can be established. Finally, the parameters optimization is carried out for channel spacing, to find the most suitable value between the two channels to improve the service life of roller bearings. © 2019. MechAero Foundation for Technical Research & Education Excellence.
引用
收藏
页码：386 / 388
页数：2
相关论文
共 50 条
  • [21] Mechanical properties of functionally graded 2-D cellular structures: A finite element simulation
    Ajdari, A.
    Canavan, P.
    Nayeb-Hashemi, H.
    Warner, G.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 499 (1-2): : 434 - 439
  • [22] Effect of interfacial intermetallic compounds morphology on mechanical properties of solder joint with finite element simulation
    Tian, Shuang
    Cao, Ruihua
    Zhou, Jian
    Xue, Feng
    Zhou, Jian
    Xue, Feng
    2017 18TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2017, : 235 - 239
  • [23] Finite element simulation on the mechanical and electrical properties of double-sided microelectrode array chip
    Gong R.
    Zhao Z.
    Huang H.
    Wang J.
    Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University, 2017, 51 (01): : 141 - 146
  • [24] Mechanical properties of AM60 magnesium alloys by nanoindentation technique and finite element simulation
    Shan, ZH
    Gokhale, AM
    MODELING THE PERFORMANCE OF ENGINEERING STRUCTURAL MATERIALS III, 2002, : 333 - 341
  • [25] Mechanical characterization of PMMA by AFM nanoindentation and finite element simulation
    Zheng, L.
    Jiang, X.
    Deng, X. H.
    Yin, J. R.
    Jiang, Y.
    Zhang, P.
    Ding, Y. H.
    MATERIALS RESEARCH EXPRESS, 2016, 3 (11):
  • [26] Mechanical properties test and finite element analysis for litchi
    Chen Y.
    Cai W.
    Zou X.
    Xiang H.
    Liu T.
    Xu F.
    Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering, 2011, 27 (12): : 358 - 363
  • [27] Finite element modeling of mechanical properties of cancer cells
    Mao, Jiangbing
    Ruan, Weiwei
    Chen, Mengdan
    Wang, Yuhua
    Yang, Hongqin
    OPTICS IN HEALTH CARE AND BIOMEDICAL OPTICS IX, 2020, 11190
  • [28] Enhancement in thermal conductivity and mechanical properties via large-scale fabrication of boron nitride nanosheets
    Li, Shengzhao
    Yang, Tuantuan
    Zou, Huawei
    Liang, Mei
    Chen, Yang
    HIGH PERFORMANCE POLYMERS, 2017, 29 (03) : 315 - 327
  • [29] Large-scale generation and characterization of amorphous boron nitride and its mechanical properties in atomistic simulations
    Liu, Yin
    Pan, Yuncan
    Yin, Deqiang
    Song, Shufeng
    Lin, Liyang
    Qi, Xueli
    Zhang, Mingxia
    Yao, Jianyao
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 2021, 558
  • [30] Electronic Structure and Mechanical Properties of Solvated Montmorillonite Clay Using Large-Scale DFT Method
    Shafei, Layla
    Adhikari, Puja
    San, Saro
    Ching, Wai-Yim
    CRYSTALS, 2023, 13 (07)
12345