A material removal and surface roughness evolution model for loose abrasive polishing of free form surfaces

被引:14
作者
Wan, Stephen [1 ]
Liu, Yuchan [2 ]
Woon, Keng Soon [2 ]
Tnay, Guan Leong [2 ]
机构
[1] Institute of High Performance Computing, 1 Fusionolopolis Way, 16-16, Connexis
[2] Singapore Institute of Manufacturing Technology, 71 Nanyang Drive
关键词
Free form surfaces; Loose abrasive processes; Material removal; Modelling; Surface roughness;
D O I
10.1504/IJAT.2014.065828
中图分类号
学科分类号
摘要
We report on the development of a simple process model, motivated by a need to predict the evolution of surface roughness and geometrical change over external, three dimensional free form surfaces undergoing a loose abrasive polishing process. To this end, the process model was derived from tribological wear laws and cast in terms of the point sliding velocity and apparent pressure and then benchmarked against data drawn from experiments in three disparate loose abrasive finishing techniques, namely, vibratory finishing, abrasive flow machining and magnetorheological finishing. We conclude with a brief discussion on the potential and limitations of the model in analysing loose abrasive finishing processes. Copyright © 2014 Inderscience Enterprises Ltd.
引用
收藏
页码:269 / 285
页数:16
相关论文
共 50 条
[41]   On-line Prediction Model of Ultrasonic Polishing Surface Roughness [J].
Zhang, M. ;
Yang, X. Q. ;
Zhao, B. .
MANUFACTURING AUTOMATION TECHNOLOGY DEVELOPMENT, 2011, 455 :539-543
[42]   Influence of Ball-End Milling Strategy on the Accuracy and Roughness of Free Form Surfaces [J].
Gresova, Zuzana ;
Izol, Peter ;
Vrabel, Marek ;
Kascak, Lubos ;
Brindza, Jozef ;
Demko, Michal .
APPLIED SCIENCES-BASEL, 2022, 12 (09)
[43]   Hand and Abrasive Flow Polished Tungsten Carbide Die: Optimization of Surface Roughness, Polishing Time and Comparative Analysis in Wire Drawing [J].
Kumar, Raman ;
Singh, Sehijpal ;
Aggarwal, Vivek ;
Singh, Sunpreet ;
Pimenov, Danil Yurievich ;
Giasin, Khaled ;
Nadolny, Krzysztof .
MATERIALS, 2022, 15 (04)
[44]   Effect of different parameters on surface roughness and material removal rate in abrasive water jet cutting of Nimonic C263 [J].
Bagchi, Arghya ;
Srivastava, Madhulika ;
Tripathi, Rupam ;
Chattopadhyaya, Somnath .
MATERIALS TODAY-PROCEEDINGS, 2020, 27 :2239-2242
[45]   Comparative Analysis of Abrasive Materials and Polishing System on the Surface Roughness of Heat-Polymerized Acrylic Resins [J].
Onwubu, Stanley Chibuzor ;
Mdluli, Phumlane Selby .
EUROPEAN JOURNAL OF DENTISTRY, 2022, 16 (03) :573-579
[46]   Study on the influence of the rotational speed of polishing disk on material removal in aspheric surface compliant polishing [J].
Hu, Liyong ;
Zhan, Jianming ;
Zheng, Di .
ADVANCES IN MECHANICAL ENGINEERING, 2015, 7 (03) :1-8
[47]   Monitoring of surface roughness evolution during abrasive flow machining by acoustic emission [J].
Sangil Han ;
Ferdinando Salvatore ;
Christophe Claudin ;
Joël Rech ;
Fabio Wosniak ;
Patrick Matt .
The International Journal of Advanced Manufacturing Technology, 2024, 131 :595-609
[48]   Monitoring of surface roughness evolution during abrasive flow machining by acoustic emission [J].
Han, Sangil ;
Salvatore, Ferdinando ;
Claudin, Christophe ;
Rech, Joel ;
Wosniak, Fabio ;
Matt, Patrick .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 131 (02) :595-609
[49]   Surface roughness and material removal rate of lapping process on ceramics [J].
Ahn, Y ;
Park, SS .
KSME INTERNATIONAL JOURNAL, 1997, 11 (05) :494-504
[50]   Surface roughness and material removal rate of lapping process on ceramics [J].
Yoomin Ahn ;
Sang-Shin Park .
KSME International Journal, 1997, 11 :494-504