Analysis of Fiber Orientation of Paper using Pilot Machine with Open Headbox: Effect of Stock Dispersion at Headbox

被引：0
作者：
Choi K.-H. [1 ]
Lee K.S. [1 ]
Lee C.W. [1 ]
Ryu J.-Y. [2 ]
机构：
[1] Changgang Institute of Paper Science and Technology, Kangwon National University, Chuncheon
[2] Dept. of Paper Science & Engineering, College of Forest and Environmental Sciences, Kangwon National University, Chuncheon
来源：
Palpu Chongi Gisul/Journal of Korea Technical Association of the Pulp and Paper Industry | 2024年 / 56卷 / 03期
关键词：
CD/MD tensile index ratio; Fiber orientation; formation; pilot-scale wet-web forming machine; slice gap; turbulence plate;
D O I：
10.7584/JKTAPPI.2024.6.56.3.19
中图分类号：
学科分类号：
摘要：
In this study, it was explored whether it is possible to improve the fiber orientation and formation of paper by controlling the flow of the fiber dispersion in the headbox during papermaking using a pilot scale wet-web forming machine having open type headbox. After preparing paper specimens by adjusting the height of the turbulence plate and the height of the slice opening of the headbox, the physical properties of each paper specimen, such as CD and MD tensile strength and bond strength, were measured and compared. As the gap between the bottom of the headbox and the turbulence plate or the gap of slice was smaller, that is, the flow velocity of the stock were increased, fibers of the paper were oriented in the machine direction and the formation was relatively good. These results indicate that it is possible to change the fiber orientation and formation of paper by controlling the flow of the stock at the headbox. © 2024 Korean Technical Assoc. of the Pulp and Paper Industry. All rights reserved.
引用
收藏
页码：19 / 26
页数：7
相关论文
共 11 条
  • [1] Choi K. H., Lee K. S., Lee J. H., Ryu J Y., Hydrophobization of cellulose sheets by gas grafting of palmitoyl chloride by using hot press, Carbohydrate Polymers, 246, 1, (2020)
  • [2] Choi K. H., Lee K. S., Ryu J Y., Effects of various properties of cellulose sheets on hydrophobization efficiency of gas grafting with palmitoyl chloride, Cellulose, 29, 1, pp. 2199-2209, (2022)
  • [3] Su Y., Yang B., Liu J., Sun B., Cao C., Zou X., Lutes R., He Z., Prospects for replacement of some plastics in packaging with lignocellulose materials: A brief review, Bio-Resources, 13, 2, pp. 4550-4576, (2018)
  • [4] Norman. B., Overview of the physics of forming, Fundamentals of Papermaking, pp. 73-149, (1989)
  • [5] Carlsson A., Lundell F., Soderberg. L. D., Fiber orientation control related to papermaking, Journal of Fluids Engineering, 129, pp. 457-465, (2007)
  • [6] Asplund G., Norman B., Fibre orientation anisotropy profile over the thickness of a headbox jet, Journal of Pulp and Paper Science, 30, 8, pp. 217-221, (2004)
  • [7] Mason D. W., The fundamentals of formation, Eucalypus Online Book, (1998)
  • [8] Chapter 21 - Bleaching and Pulp Properties Calculations, Biermann's Handbook of Pulp and Paper (Third Edition), 1, pp. 509-525, (2018)
  • [9] Sengupta G., Some factors affecting drainage and sheet formation, IPPTA Journal, pp. 60-63, (1965)
  • [10] Hamalainen T., Modeling of fibre orientation and fibre flocculation phenomena in paper sheet forming, (2008)
12