Effect of Strain Ranges and Phase Angles on the Thermomechanical Fatigue Properties of Thermal Barrier Coating System

被引：0

作者：

Huang, Feng ^{[1
]}

Nie, Ming ^{[1
]}

Lin, Jiedong ^{[1
]}

Hua, Xu ^{[2
]}

Chen, Guofeng ^{[2
]}

Zhou, Zhongjiao ^{[3
]}

机构：

[1] Electric Power Research Institute, Guangdong Power Grid Co. Ltd, Guangzhou,510080, China

[2] Corporate Technology, Siemens, Shanghai,200082, China

[3] Division of Micro/Nano Manufacturing, State Key Laboratory of Tribology, Tsinghua University, Beijing,100084, China

来源：

Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering | 2017年 / 46卷 / 12期

关键词：

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Thermal barrier coatings (TBCs) are the key material of components used in elevated temperature of gas turbines, and their mechanism of delamination and failure under service conditions has been the hot spot of research for a long time. The influences of strain ranges and phase angles on the thermomechanical fatigue (TMF) properties of samples with TBCs were investigated. It is shown that under the same phase angles, the TMF lifetime decreases with the increase of strain ranges. Under the same strain range, the in-phase tests have longer TMF lifetime than out-of-phase tests. In both samples, cracks are initiated in thermally grown oxide (TGO) layer, and then propagate along the bond coat/ceramic top coat, forming the delamination cracks. When the delamination cracks connect with the segmentation cracks initiated in ceramic coat, the TBCs spall. A TMF lifetime model concerning strain ranges and phase angles is established, and an exponential law exists between TMF lifetime and the maximum stress. © 2017, Northwest Institute for Nonferrous Metal Research. Published by Elsevier BV. All rights reserved.

引用

页码：3693 / 3698

共 50 条

[41] Effect of Thermal Exposure on Mechanical Properties of a Plasma-Sprayed Nanostructured Thermal Barrier Coating
Zilong Wu
Liyong Ni
Qinghe Yu
Chungen Zhou
Journal of Thermal Spray Technology, 2012, 21 : 169 - 175
[42] The Effect of Environment on Thermal Barrier Coating Lifetime
Pint, Bruce A.
Unocic, Kinga A.
Haynes, J. Allen
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2016, 138 (08):
[43] The effect of bond coat oxidation on the microstructure and endurance of a thermal barrier coating system
Taylor, M. P.
Jackson, R. D.
Evans, H. E.
MATERIALS AT HIGH TEMPERATURES, 2009, 26 (03) : 317 - 323
[44] Effect of periodic surface cracks on the interfacial fracture of thermal barrier coating system
Fan, X. L.
Xu, R.
Zhang, W. X.
Wang, T. J.
APPLIED SURFACE SCIENCE, 2012, 258 (24) : 9816 - 9823
[45] Effect of preheating temperature on formation of surface cracks in thermal barrier coating system
Li D.
Yang L.
Sun F.
Jiang P.
Chen Y.
Wang T.
Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica, 2022, 43 (06):
[46] The effect of a high thermal gradient on sintering and stiffening in the top coat of a thermal barrier coating system
Tsipas, SA
Golosnoy, IO
Damani, R
Clyne, TW
JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2004, 13 (03) : 370 - 376
[47] The effect of a high thermal gradient on sintering and stiffening in the top coat of a thermal barrier coating system
S. A. Tsipas
I. O. Golosnoy
T. W. Clyne
R. Damani
Journal of Thermal Spray Technology, 2004, 13 : 370 - 376
[48] Prediction of thermal growth stress in thermal barrier coating system
Wang, Fenghui
Wang, Yongjun
Wu, Yingxi
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2010, 39 (12): : 2122 - 2126
[49] Prediction of Thermal Growth Stress in Thermal Barrier Coating System
Wang Fenghui
Wang Yongjun
Wu Yingxi
RARE METAL MATERIALS AND ENGINEERING, 2010, 39 (12) : 2122 - 2126
[50] Effect of coating thickness on microstructure and low temperature cyclic thermal fatigue behavior of thermal barrier coating (Al2O3)
Verma, Vijay
Patel, Sachin
Swarnkar, Vikas
Rajput, S. K.
INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS, MECHANICAL AND CIVIL ENGINEERING, 2018, 330

← 1 2 3 4 5 →