Study on tribological properties of Ni-based silicide coating on copper by laser cladding

被引：0

作者：

Liu, Xiaopeng ^{[1
,2
]}

Zhang, Peilei ^{[1
,2
]}

Lu, Yunlong ^{[1
,2
]}

Yan, Hua ^{[1
,2
]}

Yu, Zhishui ^{[1
,2
]}

机构：

[1] School of Materials Engineering, Shanghai University of Engineering Science, Shanghai

[2] Research & Development Center for Key Technologies of Intelligent Ultra-Intense Laser Processing Equipments, Shanghai University of Engineering Science, Shanghai

来源：

Zhongguo Jiguang/Chinese Journal of Lasers | 2015年 / 42卷 / 09期

关键词：

Cr[!sub]3[!/sub]Si; Laser cladding; Materials; Ni[!sub]16[!/sub]Cr[!sub]6[!/sub]Si[!sub]7[!/sub; Wear resistance;

D O I：

10.3788/CJL201542.0906005

中图分类号：

学科分类号：

摘要：

Two Ni-Cr-Si coatings of Cr3Si+γNi (45Ni-26Cr-29Si) and Ni16Cr6Si7+Ni2Si (60Ni-10Cr-30Si) (atomic fraction, %) are synthesized on pure copper using laser cladding. The microstructures of the coatings are analyzed by optical microscope (OM), scanning electron microscope (SEM), X-ray diffraction (XRD) and energy dispersive spectrometer (EDS). The wear resistance of the coatings is evaluated under ambient temperature. The results show that due to the different crystallization temperature ranges between binary phase and ternary phase, constitutional supercooling degrees are different in the process of crystallization and different microstructures are formed. The coating consisted of Cr3Si+γNi has an average hardness of 1000 HV and the friction coefficient of 0.5, but 4 cracks appear to the corner of indentation when loads add to 500 g. The coating consisted of Ni16Cr6Si7+Ni2Si with an average hardness of 900 HV, fine toughness of no cracks generating under loads of 1000 g, an average friction coefficient of 0.5 has good comprehensive performance than that of the coating consisted of Cr3Si+γNi. ï¿½, 2015, Science Press. All right reserved.

引用

页数：7

共 17 条

[1]

Yan H., Zhang P.L., Yu Z.S., Et al., Microstructure and tribological properties of laser-clad Ni-Cr/TiB2 composite coatings on copper with the addition of CaF2, Surface & Coatings Technology, 206, 19, pp. 4046-4053, (2012)

[2]

Dehm G., Medres B., Shepeleva L., Et al., Microstructure and tribological properties of Ni-based claddings on Cu substrates, Wear, 225, pp. 18-26, (1999)

[3]

Zhang P.L., Liu X.P., Lu Y.L., Et al., Microstructure and wear behavior of Cu-Mo-Si coatings by laser cladding, Applied Surface Science, 311, pp. 709-714, (2014)

[4]

Zhang Y.Z., Tu Y., Xi M.Z., Et al., Characterization on laser clad nickel based alloy coating on pure copper, Surface & Coatings Technology, 202, 24, pp. 5924-5928, (2008)

[5]

Yan H., Zhang J., Zhang P.L., Et al., Laser cladding of Co-based alloy/TiC/CaF2 self-lubricating composite coatings on copper for continuous casting mold, Surface & Coatings Technology, 232, pp. 362-369, (2013)

[6]

Liu F., Liu C.S., Chen S.Y., Et al., Laser cladding Ni-Co duplex coating on copper substrate, Optics and Lasers in Engineering, 48, 7, pp. 792-799, (2010)

[7]

Ng K.W., Man H.C., Cheng F.T., Et al., Laser cladding of copper with molybdenum for wear resistance enhancement in electrical contacts, Applied Surface Science, 253, 14, pp. 6236-6246, (2007)

[8]

Wang H.M., Duan G., Microstructure and wear resistance of a laser clad reinforced Cr3Si metal silicide composite coating, Materials Science and Engineering: A, 336, 1, pp. 117-123, (2002)

[9]

Wang H.M., Duan G., Wear and corrosion behavior of laser clad Cr3Si reinforced intermetallic composite coatings, Intermetallics, 11, 8, pp. 755-762, (2003)

[10]

Duan G., Wang H.M., High-temperature wear resistance of a laser-clad γ/Cr3Si metal silicide composite coating, Scripta Materialia, 46, 1, pp. 107-111, (2002)

← 1 2 →