Finite element analysis of bending stress in the meshing process for internal gear pairs with few teeth difference

被引：0

作者：

School of Mechanical Engineering, Dalian Jiaotong University, Dalian 116028, China ^{[1
]}

机构：

[1] School of Mechanical Engineering, Dalian Jiaotong University

来源：

Adv. Mater. Res. | 2013年 / 129-133期

关键词：

Bending stress; Few teeth difference; Finite element analysis; Internal gear pair; Multi-pair teeth meshing;

D O I：

10.4028/www.scientific.net/AMR.764.129

中图分类号：

学科分类号：

摘要：

According to the transmission characteristics of the internal gear pair with few teeth difference, the models of finite element analysis are established reasonably after combining the principle of gear engagement, contact mechanics, and finite element concept and method. The relationship between the simulation model of finite element and the meshing process is made clearly. The simulation analysis is performed subtly for the meshing process of the internal gear pair using the finite element analysis method. The main factors of multi-pair teeth meshing effect have been shown and the effect of multi-pair teeth meshing on the gear bending stress is analyzed. © (2013) Trans Tech Publications, Switzerland.

引用

页码：129 / 133

页数：4

共 50 条

[21] Numerical Simulation of Bending Process for Steel Plate Using Finite Element Analysis
Jabbar Gattmah
Fahrettin Ozturk
Sadettin Orhan
Arabian Journal for Science and Engineering, 2019, 44 : 10285 - 10292
[22] Calculation of Tooth Surface Contact Stress and Tooth Root Bending Stress of the Asymmetric Gear with Double Pressure Angles Meshing Beyond the Pitch Point Based on Friction Between Teeth
Li, Xiu-Lian
Sze, Kam-Yim
Xu, Xu-Song
Liu, Wei
Shi, Xiao-Fang
Wang, Xian-Wei
Sun, Hong-Tao
JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS, 2020, 41 (03): : 275 - 287
[23] Numerical Simulation of Bending Process for Steel Plate Using Finite Element Analysis
Gattmah, Jabbar
Ozturk, Fahrettin
Orhan, Sadettin
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2019, 44 (12) : 10285 - 10292
[24] Finite Element Analysis and Optimization of Deformation Behavior for Spur Gear Warm Forging Process
Xu, Shubo
Jing, Cainian
Sun, Keke
Ren, Guocheng
Wang, Guiqing
MANUFACTURING PROCESSES AND SYSTEMS, PTS 1-2, 2011, 148-149 : 854 - +
[25] Three-dimensional finite element stress analysis of teeth adjacent to a traumatized incisor
Vilela, Andomar B. F.
Soares, Priscilla B. F.
Almeida, Guilherme A.
Verissimo, Crisnicaw
Rodrigues, Monise P.
Versluis, Antheunis
Soares, Carlos J.
DENTAL TRAUMATOLOGY, 2019, 35 (02) : 128 - 134
[26] Finite Element Analysis on the Stress Intensity Factor under Combined Bending and Torsion Loading
Ismail, A. E.
Ariffin, A. K.
Abdullah, S.
Ghazali, M. J.
Abdulrazzaq, M.
FRACTURE AND STRENGTH OF SOLIDS VII, PTS 1 AND 2, 2011, 462-463 : 1325 - +
[27] Stress Analysis of Asymmetric Spur Face-gear Pair Based on Finite Element Method
Zhao Ning
Zhang Mengqi
Guo Hui
MECHANICAL ENGINEERING, MATERIALS AND ENERGY III, 2014, 483 : 309 - +
[28] Occlusal Loading Effect on Stress Distribution of Endodontically Treated Teeth: Finite Element Analysis Study
Wendling, Marianna Mafuzo
Mantovani, Giovanni
Fernandes, Bruno Viezzer
Carneiro, Dominique Ellen
Santos, Rodrigo Villaca
Sanchez-Ayala, Alfonso
EUROPEAN JOURNAL OF PROSTHODONTICS AND RESTORATIVE DENTISTRY, 2024, 32 (01) : 102 - 108
[29] Stress Distribution due to Loading on Premolar Teeth Implant: A Three Dimensional Finite Element Analysis
Hisam, M. J.
Lim, J. Y.
Kurniawan, D.
Nor, F. M.
2ND INTERNATIONAL MATERIALS, INDUSTRIAL, AND MANUFACTURING ENGINEERING CONFERENCE, MIMEC2015, 2015, 2 : 218 - 223
[30] The effect of periapical bone defects on stress distribution in teeth with periapical periodontitis: a finite element analysis
ShuoMin Chen
ZhangYan Ye
XinHua Hong
Liang Chen
LinMei Wu
Yilin Wang
YuGe Chen
MengHan Wu
Jun Wang
QinHui Zhang
YuTian Wu
XiaoYu Sun
Xi Ding
ShengBin Huang
ShuFan Zhao
BMC Oral Health, 23

← 1 2 3 4 5 →