Preparation and characterization of graphite films with high thermal conductivity

被引：0

作者：

Yuan, Guanming ^{[1
,2
]}

Li, Xuanke ^{[1
,2
]}

Dong, Zhijun ^{[1
,2
]}

Cui, Zhengwei ^{[2
]}

Cong, Ye ^{[2
]}

Zhang, Jiang ^{[2
]}

Li, Yanjun ^{[2
]}

Zhang, Zhongwei ^{[3
]}

Wang, Junshan ^{[3
]}

机构：

[1] The State Key Laboratory of Refractories and Metallurgy, Wuhan University of Science and Technology, Wuhan

[2] Hubei Province Key Laboratory of Coal Conversion & New Carbon Materials, Wuhan University of Science and Technology, Wuhan

[3] Aerospace Research Institute of Materials and Processing Technology, Beijing

来源：

Gongneng Cailiao/Journal of Functional Materials | 2015年 / 46卷 / 17期

关键词：

Graphite film; Preparation; Structure; Thermal conductivity;

D O I：

10.3969/j.issn.1001-9731.2015.17.021

中图分类号：

学科分类号：

摘要：

Graphite films were prepared from DuPon polyimide films with different thicknesses by carbonization and graphitization treatments at a certain press. The micro-structural evolution of PI films during the process of high-temperature treatments was characterized by polarized light microscope, scanning electron microscope, X-ray diffraction and Raman spectrum. The results show that the PI graphite films (with a thickness of 50 μm for raw films) possess a three-dimensional structure of graphite layers with preferred orientation and prefect graphite crystals after graphitization at 3000℃. The corresponding interlayer spacing and stacking height of (002) crystal plane of the PI graphite film are 0.336 and 65.94 nm, respectively. The degree of graphitization of the PI graphite film is as high as 93%, and the electrical resistivity and thermal conductivity of the PI graphite films at room temperature in the main plane direction are measured to be 0.48 μΩ·m and 994 W/(m·K), respectively. The higher heat-treated temperature, the more easily transformation from the turbostratic carbon to ordered graphite, resulting in the better growth and crystallization of graphite microcrystals, and the more orientation of graphite layers. However, the microcrystals in the thick PI graphite films grow and crystallize difficultly, and their preferred orientation of carbon layers is very low. ©, 2015, Journal of Functional Materials. All right reserved.

引用

页码：17097 / 17101and17106

共 15 条

[1] Inagaki M., New Carbons Control of Structure and Functions, (2000)
[2] Burger A., Fitzer E., Heym M., Et al., Polyimides as precursors for artificial carbon, Carbon, 13, 3, pp. 149-157, (1975)
[3] Hishiyama Y., Yoshida A., Kaburagi Y., Graphite films prepared from carbonized polyimide films, Carbon, 30, 3, pp. 333-337, (1992)
[4] Hishiyama Y., Nakamura M., Nagata Y., Et al., Graphitization behavior of carbon film prepared from high modulus polyimide film: synthesis of high-quality graphite film, Carbon, 32, 4, pp. 645-650, (1994)
[5] Kaburagi Y., Hishiyama Y., Highly crystallized graphite films prepared by high-temperature heat treatment from carbonized aromatic polyimide films, Carbon, 33, 6, pp. 773-777, (1995)
[6] Murakami M., Nishiki N., Knakamura K., Et al., High-quality and highly oriented graphite block from polycondensation polymer films, Carbon, 30, 2, pp. 255-262, (1992)
[7] Gengxiang Z., Chuanfeng Z., Study on pyrolysis behavior of precursor of kapton film used for graphite film with high crystallinity, Carbon Techniques, 129, 6, pp. 13-16, (2003)
[8] Haiying L., Gao X., Zhou G., Et al., Research on the highly oriented graphite from polyimide films, Journal of Functional Materials, 37, 1, pp. 106-108, (2006)
[9] Shuying Q., Weidong C., Zeng-Min S., Studies of the structural conversion and property change of polyimide film during the carbonization, Journal of Materials Science & Engineering, 25, 1, pp. 115-117, (2007)
[10] Kaburagi Y., Kimura T., Yoshida A., Et al., Thermal and electrical conductivity and magnetoresistance of graphite films prepared from aromatic polyimide films, Tanso, 253, pp. 106-115, (2012)

← 1 2 →