Preparation and performance testing of amidation modified acoustic matching layer for air coupling ultrasonic transducer

被引：0

作者：

Han S. ^{[1
]}

Kang Y. ^{[1
]}

Shao X. ^{[1
]}

机构：

[1] Intelligent Manufacturing College, Tianjin Sino-German University of Applied Sciences, Tianjin

来源：

Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2024年 / 41卷 / 05期

基金：

中国国家自然科学基金;

关键词：

air-coupled ultrasonic transducer; amidation modification; gas ultrasonic flowmeter; hollow glass microspheres; matching layer;

D O I：

10.13801/j.cnki.fhclxb.20230914.003

中图分类号：

学科分类号：

摘要：

A high-sensitivity air-coupled ultrasonic transducer with an acoustic matching layer based on epoxy resin/hollow glass microsphere (HGM) is investigated. In order to improve the dispersion of low-density HGM in high-density epoxy resin matrix, poly(methyl vinyl ether-alt-maleic anhydride) (PVMMA) was grafted onto the HGM surface (PVMMA-g-HGM). The morphology and surface chemical characteristics of modified HGM and HGM/epoxy resin composite were analyzed. An air-coupled ultrasonic transducer was fabricated with the improved matching layer, which achieved a peak-to-peak voltage of 4.88 V. In addition, the gas ultrasonic flowmeter equipped with the improved ultrasonic transducer had better flow field adaptability, and the relative error was less than 1.0%. This work is to propose a new technology to improve the performance of ultrasonic transducer in gas ultrasonic flowmeter. © 2024 Beijing University of Aeronautics and Astronautics (BUAA). All rights reserved.

引用

页码：2455 / 2464

页数：9

共 28 条

[1]

YIN X, WEN K, WU Y, Et al., A machine learning-based surrogate model for the rapid control of piping flow: Application to a natural gas flowmeter calibration system, Journal of Natural Gas Science and Engineering, 98, (2022)

[2]

ABAD A R B, GHORBANI H, MOHAMADIAN N, Et al., Robust hybrid machine learning algorithms for gas flow rates prediction through wellhead chokes in gas condensate fields, Fuel, 308, (2022)

[3]

FARZANEH-GORD M, RAHBARI H R., An intelligent approach for calculating natural gas compressibility factor and its application in ultrasonic flow meters, Flow Measurement and Instrumentation, 76, (2020)

[4]

MOUSAVI S F, HASHEMABADI S H, JAMALI J., Calculation of geometric flow profile correction factor for ultrasonic flow meter using semi-3D simulation technique, Ultrasonics, 106, (2020)

[5]

YANG B, ZHANG Y, SHI L, Et al., Optimize the rectifier structure to improve the accuracy of gas ultrasonic flowmeter under low flow conditions, Journal of Physics: Conference Series, 2458, 1, (2023)

[6]

POP F, HERRERA B, RINALDI M., Lithium niobate piezoelectric micromachined ultrasonic transducers for high data-rate intrabody communication, Nature Communications, 13, 1, (2022)

[7]

LIU P, HU Y, CHEN Y, Et al., Investigation of novel embedded piezoelectric ultrasonic transducers on crack and corrosion monitoring of steel bar, Construction and Building Materials, 235, (2020)

[8]

SUN X H, MAN J J, CHEN D D, Et al., Intelligent optimization of matching layers for piezoelectric ultrasonic transducer, IEEE Sensors Journal, 21, 12, pp. 13107-13115, (2021)

[9]

LI Z X, CHEN D D, FEI C L, Et al., Optimization design of ultrasonic transducer with multimatching layer, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 68, 6, pp. 2202-2211, (2021)

[10]

YANG X Y, FEI C L, LI D, Et al., Multi-layer polymer-metal structures for acoustic impedance matching in high-frequency broadband ultrasonic transducers design, Applied Acoustics, 160, (2020)

← 1 2 3 →