Input method of obliquely incident earthquake for step-shaped layered site

被引：0
|
作者：
Zhao M. [1 ]
Sun W.-D. [1 ]
Gao Z.-D. [1 ]
Huang J.-Q. [2 ]
Du X.-L. [1 ]
机构：
[1] Key Laboratory of Urban Security and Disaster Engineering of Ministry of Education, Beijing University of Technology, Beijing
[2] School of Civil and Environmental Engineering, University of Science and Technology Beijing, Beijing
来源：
Gongcheng Lixue/Engineering Mechanics | 2019年 / 36卷 / 12期
关键词：
Layered media; Obliquely incidence earthquake; Site response analysis; Step-shaped topography; Viscous boundary;
D O I：
10.6052/j.issn.1000-4750.2018.10.0574
中图分类号：
学科分类号：
摘要：
An input method of obliquely incident earthquake for a layered site with step-shaped topography is developed based on the viscous boundary and the horizontal layered site response analysis method under obliquely incident earthquake. The input wave fields at lateral boundaries are the free field responses of a horizontal layered site. Each lateral boundary uses the site with identical parameters as a lateral boundary, and therefore two lateral boundaries use the different site models. The input wave field at the bottom boundary is an incident wave field. Because above treatments, the input method is approximate. The factors affecting the accuracy of the method have been discussed, such as boundary location, inputted earthquake, the angle of incidence, slope inclination, and layered media. The results indicate that the peak error of displacement is less than 5% for all kinds of cases studied in this paper under the SV wave. The accuracy of the proposed input method of obliquely incidence earthquake satisfies the engineering requirements, and the method can be used for seismic response analysis of a step-shaped topography site. © 2019, Engineering Mechanics Press. All right reserved.
引用
收藏
页码：62 / 68
页数：6
相关论文
共 22 条
  • [1] Jiang S., Yang J., Yao C., Et al., Quantitative risk assessment of slope failure considering spatial variability of soil properties, Engineering Mechanics, 35, 1, pp. 136-147, (2018)
  • [2] Jiang S., Yao C., Yang J., Et al., Model correction factor method based approach for reliability analysis of spatially variable slopes, Engineering Mechanics, 35, 8, pp. 154-161, (2018)
  • [3] Babak P., Arash F., Loukas F.K., Seismic wave amplification by topographic features: A parametric study, Soil Dynamics and Earthquake Engineering, 92, pp. 503-527, (2017)
  • [4] Valentin S.G., Erik E., Jeffrey R.M., Et al., On the seismic response of deep-seated rock slope instabilities-Insights from numerical modeling, Engineering Geology, 193, pp. 1-18, (2015)
  • [5] Panagiotis P., Anastasios B., Eleni P., Et al., Surface topography and site stratigraphy effects on the seismic response of a slope in the Achaia-Ilia (Greece) 2008 Mw6.4 earthquake, Soil Dynamics and Earthquake Engineering, 100, pp. 538-554, (2017)
  • [6] Samuela R., Ernesto C., Giovanni B., Coupling of topographic and stratigraphic effects on seismic response of slopes through 2D linear and equivalent linear analyses, Soil Dynamics and Earthquake Engineering, 67, pp. 66-84, (2014)
  • [7] Tripe R., Kontoe S., Wong T.K.C., Slope topography effects on ground motion in the presence of deep soil layers, Soil Dynamics and Earthquake Engineering, 50, pp. 72-84, (2013)
  • [8] Bouckovalas G.D., Papadimitriou A.G., Numerical evaluation of slope topography effects on seismic ground motion, Soil Dynamics and Earthquake Engineering, 25, pp. 547-558, (2005)
  • [9] Naohiro N., Two-dimensional energy transmitting boundary in the time domain, Earthquakes and Structures, 3, 2, pp. 97-115, (2012)
  • [10] Huang J., Study on nonlinear seismic response of rock tunnels, (2015)
123