Experimental research on mechanical property size effects of AISI D2 steel

被引:0
|
作者
Yu, Jian-Chao [1 ]
Jiang, Feng [1 ]
Rong, Yi-Min [1 ,2 ]
机构
[1] State Key Laboratory of Tribology, Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084, China
[2] Mechanical Engineering Department, Worcester Polytechnic Institute, Worcester 01609, United States
关键词
Steel testing - Shear flow - Bridge decks - Constitutive models - Mechanical testing - Strain rate;
D O I
暂无
中图分类号
学科分类号
摘要
Quasi-static and dynamic shear deformation of hat shaped specimen with three different widths of shear zone (800, 400, 50 μm respectively) were performed by electronic universal testing machine and Split Hopkinson Pressure Bar(SHPB)at room temperature. The size effects of AISI D2 steel mechanical property were studied. The experimental results show that the flow stress and failure strain of material increase with the decrease of shear zone widths, however the shear zone widths which induce the size effect of flow stress and failure strain are different. Based on the Johnson-Cook constitutive model, the constitutive relation of material with different shear zone widths was fitted by the experiment results. The item of strain rate sensitivity is modified, and the modified Johnson-Cook constitutive model agrees well with the experimental results.
引用
收藏
页码:83 / 88
相关论文
共 50 条
  • [41] Characterization and Diffusion Kinetics of Silicon on AISI D2 Steel
    Najafizadeh, Mojtaba
    Ghasempour-Mouziraji, Mehran
    Goulas, C.
    Hosseinzadeh, Morteza
    Bozorg, Mansoor
    Cavaliere, Pasquale
    SILICON, 2024, 16 (02) : 811 - 820
  • [42] Characterization of Metallurgical and Mechanical Properties of Thixowelded AISI D2 and AISI 304 Steels
    M. N. Mohammed
    M. Z. Omar
    Z. Sajuri
    Salah Al-Zubaidi
    Journal of Materials Engineering and Performance, 2020, 29 : 739 - 749
  • [43] Characterization of Metallurgical and Mechanical Properties of Thixowelded AISI D2 and AISI 304 Steels
    Mohammed, M. N.
    Omar, M. Z.
    Sajuri, Z.
    Al-Zubaidi, Salah
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (02) : 739 - 749
  • [44] Growth kinetics and mechanical properties of Fe2B layers formed on AISI D2 steel
    Ortiz-Dominguez, M.
    Elias-Espinosa, M.
    Keddam, M.
    Gomez-Vargas, A.
    Lewise, R.
    Vera-Cardenas, E. E.
    Zuno-Silva, J.
    INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2015, 22 (02) : 231 - 243
  • [45] THE EFFECTS OF CUTTING TOOL COATING AND MACHINING PARAMETERS IN DRILLING OF STEEL AISI H13 AND AISI D2
    Tekaut, Ismail
    Demir, Halil
    JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2015, 30 (02): : 289 - 296
  • [46] Effect of Pack Siliconizing on Mechanical Properties of a Tool from Steel AISI D2: Experiment and Optimization
    Najafizadeh, Mojtaba
    Ghasempour-Mouziraji, Mehran
    METAL SCIENCE AND HEAT TREATMENT, 2022, 64 (1-2) : 45 - 50
  • [47] Mechanical properties and kinetics of boride layers on AISI D2 steel produced by plasma paste boriding
    Keddam, Mourad
    Makuch, Natalia
    Kulka, Michal
    Miklaszewski, Andrzej
    INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2020, 27 (02) : 221 - 233
  • [48] Microstructure, Mechanical and Corrosion Properties of Friction Stir-Processed AISI D2 Tool Steel
    Yasavol, Noushin
    Jafari, Hassan
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2015, 24 (05) : 2151 - 2157
  • [49] Mechanical properties and kinetics of boride layers on aisi d2 steel produced by plasma paste boriding
    Keddam, Mourad
    Makuch, Natalia
    Kulka, Michal
    Miklaszewski, Andrzej
    Keddam, Mourad (keddam@yahoo.fr), 1600, National Institute of Science Communication and Information Resources (NISCAIR), Dr. K. S. Krishnan Marg (Near Pusa Gate), New Delhi, 110-012, India (27): : 221 - 233
  • [50] Study of Carbide Evolution During Thermo-Mechanical Processing of AISI D2 Tool Steel
    D. Bombac
    M. Fazarinc
    A. Saha Podder
    G. Kugler
    Journal of Materials Engineering and Performance, 2013, 22 : 742 - 747