Experimental research on mechanical property size effects of AISI D2 steel

被引:0
|
作者
Yu, Jian-Chao [1 ]
Jiang, Feng [1 ]
Rong, Yi-Min [1 ,2 ]
机构
[1] State Key Laboratory of Tribology, Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084, China
[2] Mechanical Engineering Department, Worcester Polytechnic Institute, Worcester 01609, United States
关键词
Steel testing - Shear flow - Bridge decks - Constitutive models - Mechanical testing - Strain rate;
D O I
暂无
中图分类号
学科分类号
摘要
Quasi-static and dynamic shear deformation of hat shaped specimen with three different widths of shear zone (800, 400, 50 μm respectively) were performed by electronic universal testing machine and Split Hopkinson Pressure Bar(SHPB)at room temperature. The size effects of AISI D2 steel mechanical property were studied. The experimental results show that the flow stress and failure strain of material increase with the decrease of shear zone widths, however the shear zone widths which induce the size effect of flow stress and failure strain are different. Based on the Johnson-Cook constitutive model, the constitutive relation of material with different shear zone widths was fitted by the experiment results. The item of strain rate sensitivity is modified, and the modified Johnson-Cook constitutive model agrees well with the experimental results.
引用
收藏
页码:83 / 88
相关论文
共 50 条
  • [1] Effects of Ultrasonic Nanocrystal Surface Modification on Mechanical Properties of AISI D2 Steel
    Chanjin Kim
    Sanghu Park
    Youngsik Pyoun
    Dosik Shim
    International Journal of Precision Engineering and Manufacturing, 2021, 22 : 1271 - 1284
  • [2] Effects of Ultrasonic Nanocrystal Surface Modification on Mechanical Properties of AISI D2 Steel
    Kim, Chanjin
    Park, Sanghu
    Pyoun, Youngsik
    Shim, Dosik
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2021, 22 (07) : 1271 - 1284
  • [3] Experimental Study in HSM of Hardened Steel AISI D2
    Qi, B. Y.
    He, N.
    Li, L.
    ULTRA-PRECISION MACHINING TECHNOLOGIES, 2009, 69-70 : 374 - +
  • [4] Microstructure and Mechanical Properties of Thixowelded AISI D2 Tool Steel
    Mohammed, M. N.
    Omar, M. Z.
    Al-Zubaidi, Salah
    Alhawari, K. S.
    Abdelgnei, M. A.
    METALS, 2018, 8 (05):
  • [5] An experimental investigation on machining parameters of AISI D2 steel using WEDM
    Singh, Vikram
    Bhandari, Rakesh
    Yadav, Vinod Kumar
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 93 (1-4): : 203 - 214
  • [6] An experimental investigation on machining parameters of AISI D2 steel using WEDM
    Vikram Singh
    Rakesh Bhandari
    Vinod Kumar Yadav
    The International Journal of Advanced Manufacturing Technology, 2017, 93 : 203 - 214
  • [7] Experimental study of the chip morphology in turning hardened AISI D2 steel
    Mohamed Baccar Mhamdi
    Sahbi Ben Salem
    Mohamed Boujelbene
    Emin Bayraktar
    Journal of Mechanical Science and Technology, 2013, 27 : 3451 - 3461
  • [8] Experimental study of the chip morphology in turning hardened AISI D2 steel
    Mhamdi, Mohamed Baccar
    Ben Salem, Sahbi
    Boujelbene, Mohamed
    Bayraktar, Emin
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2013, 27 (11) : 3451 - 3461
  • [9] Experimental Study on Microstructure Evolution in AISI D2 Steel Surface Grinding
    Yan, L.
    Jiang, F.
    Rong, Y. M.
    ADVANCES IN GRINDING AND ABRASIVE TECHNOLOGY XVI, 2011, 487 : 126 - 130
  • [10] Preparing TiC coating on AISI D2 steel using mechanical milling technique
    Saba, Farhad
    Raygan, Shahram
    Abdizadeh, Hossein
    Dolatmoradi, Ata
    POWDER TECHNOLOGY, 2013, 246 : 229 - 234