Processing and mechanical properties of poly(ε-caprolactone)/graphite composites

被引：0
作者：
Zenkiewicz, Marian [1 ]
Richert, Józef [2 ]
机构：
[1] Kazimierz Wielki University, Department of Materials Engineering, 85-064 Bydgoszcz
[2] Institute for Engineering of Polymer Materials and Dyes, 87-100 Toruń
来源：
Polimery/Polymers | 2013年 / 58卷 / 03期
关键词：
Impact strength; Mechanical properties; Melt mass-flow rate; Poly(ε-caprolactone)/graphite composites;
D O I：
10.14314/polimery.2013.224
中图分类号：
学科分类号：
摘要：
Influence of graphite microparticles on the static tensile strength (σM, σB, εM, εB and E), impact trength (uC), and mass melt flow rate (MFR) of composites including a poly(ε-capro-lactone) matrix was investigated. The composites with graphite content from 0 to 50 wt. % were prepared. It was found that the increase in the graphite fraction caused the increase in both the static tensile strength (σM) and the longitudinal modulus of elasticity (E) and the decrease in the tensile strain at break (εB), Charpy impact strength (uC), and melt mass-flow rate (MFR).
引用
收藏
页码：224 / 227
页数：3
相关论文
共 11 条
  • [1] Sichel E.K., Carbon Black Polymer Composites, (1989)
  • [2] Zenkiewicz M., Richert J., Richert A., Polym. Test., 30, (2011)
  • [3] Min X., Sun L., Liu J., Li Y., Gong K., Polymer, 43, (2002)
  • [4] Wakabayashi K., Brunner P.J., Masuda J., Hewlett S.A., Torkelson J.M., Polymer, 51, (2010)
  • [5] Sengupta R., Bhattacharya M., Bandyopadhyay S., Bhow-Mick A.K., Prog. Polym. Sci., 36, (2011)
  • [6] Mai Y.-W., Yu Z.-Z., Polymer/graphite nanocomposites, Polymer Nanocomposites, (2006)
  • [7] Horrocks A.T., Mwila J., Miraftab M., J. Mater. Sci., 34, (1999)
  • [8] Zhang Q.-H., Chen D.-J., J. Mater. Sci., 39, (2004)
  • [9] Ding N.-X., Zhan M.-S., Wang P.-X., Polym. Test., 24, (2005)
  • [10] Yui H., Wu G., Sano H., Sumita M., Kino K., Polymer, 47, 35, (2006)
12