Investigation on chemical stripping of (Ti,Al,Cr)N multi-component hard films

被引：0
作者：
Zhang, J. [1 ]
Jiao, Y. [1 ]
机构：
[1] College of Mechanical Engineering, Shenyang University
来源：
Materials Research Innovations | 2015年 / 19卷
关键词：
(Ti; Al; Chelating agent; Cr)N film; Inhibitor; Oxidant; Stripping solution;
D O I：
10.1179/1432891715Z.0000000001651
中图分类号：
学科分类号：
摘要：
An investigation on the chemical stripping of the (Ti,Al,Cr)N multi-component hard reactive films deposited on the substrate of high-speed steel by multi-arc ion plating technology, was carried out. The stripping solution was composed of chelating agents, oxidants, inhibitors, sodium hydroxide and distilled water. The surface changes of the (Ti,Al,Cr)N films in the removal process were observed. The stripping abilities of the stripping solutions with different composition combinations were compared. The changes of the surface microstructure, the surface composition and the surface roughness of the (Ti,Al,Cr)N-coated samples after stripping processes were obtained and analysed. The optimal composition of the stripping solution and the optimal stripping process were determined. The (Ti,Al,Cr)N films deposited on high-speed steel substrates were proved to be removed completely. Simultaneously, the clean surface of the high-speed steel substrate with metallic lustre was preserved. © W. S. Maney & Son Ltd 2015.
引用
收藏
页码：180 / 184
页数：4
相关论文
共 50 条
  • [31] Effect of alloying element (Si,Y) on properties of AIP deposited (Ti,Cr,Al)N coating
    Yamamoto, Kenji
    Kujime, Susumu
    Fox-Rabinovich, German
    SURFACE & COATINGS TECHNOLOGY, 2008, 203 (5-7) : 579 - 583
  • [32] LPCVD and PACVD (Ti,Al)N films: morphology and mechanical properties
    Anderbouhr, S
    Ghetta, V
    Blanquet, E
    Chabrol, C
    Schuster, F
    Bernard, C
    Madar, R
    SURFACE & COATINGS TECHNOLOGY, 1999, 115 (2-3) : 103 - 110
  • [33] Deposition of (Ti, Al)N films by filtered cathodic vacuum arc
    Cheng, YH
    Tay, BK
    Lau, SP
    Shi, X
    Chua, HC
    THIN SOLID FILMS, 2000, 379 (1-2) : 76 - 82
  • [34] Effects of Cr and Al/W ratio on the microstructural stability, oxidation property and γ′ phase nano-hardness of multi-component Co-Ni-base superalloys
    Li, Wendao
    Li, Longfei
    Antonov, Stoichko
    Lu, Fan
    Feng, Qiang
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 826
  • [35] Preparation and characterization of hard (Ti,B)N films by ion mixing and vapor deposition
    Yamashita, M.
    Hanaki, S.
    Iwasaki, D.
    Uchida, H.
    DESIGNING OF INTERFACIAL STRUCTURES IN ADVANCED MATERIALS AND THEIR JOINTS, 2007, 127 : 251 - +
  • [36] Characterization of(Ti,Al)N films deposited by pulsed d.c. plasma-enhanced chemical vapor deposition
    Kawata, K
    Sugimura, H
    Takai, O
    THIN SOLID FILMS, 2001, 386 (02) : 271 - 275
  • [37] Effect of Heat Treatment on the Microstructure and Residual Stresses in (Ti,Al)N Films
    Ying Yang1)
    JournalofMaterialsScience&Technology, 2011, 27 (05) : 385 - 392
  • [38] The effect of multiply charged ions on the Vickers hardness of (Ti,Al)N films
    Suzuki, A
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 1998, 37 (5A): : 2656 - 2659
  • [39] Structural and mechanical property of Si incorporated (Ti,Cr,Al)N coatings deposited by arc ion plating process
    Yamamoto, K
    Kujime, S
    Takahara, K
    SURFACE & COATINGS TECHNOLOGY, 2005, 200 (5-6) : 1383 - 1390
  • [40] Microstructures and mechanical properties of (Ti, N)/Al nanocomposite films by magnetron sputtering
    Yang Duo
    Zhong Ning
    Shang Hai-Long
    Sun Shi-Yang
    Li Ge-Yang
    ACTA PHYSICA SINICA, 2013, 62 (03)
12345