Mechanical Properties of Alkali-activated Slag Concrete

被引：0

作者：

Wan X. ^{[1
,2
]}

Zhang Y. ^{[1
]}

Zhao T. ^{[1
,2
]}

Zhang S. ^{[1
]}

Cheng Y. ^{[1
]}

机构：

[1] School of Civil Engineering, Qingdao University of Technology, Qingdao

[2] Cooperative Innovation Center of Engineering Construction and Safety in Shandong Blue Economic Zone, Qingdao University of Technology, Qingdao

来源：

| 2018年 / Cailiao Daobaoshe/ Materials Review卷 / 32期

关键词：

Alkali-activated slag concrete (AASC); Mechanical property; Modulus of elastic; Poisson's ratio; Stress-strain curve;

D O I：

10.11896/j.issn.1005-023X.2018.12.028

中图分类号：

学科分类号：

摘要：

This paper presents a series of investigation results on compressive strength, splitting strength, flexural strength, elastic modulus, Poisson's ratio and stress-strain evolution of alkali-activated slag concrete (AASC). Based on the comparison with ordinary Portland cement concrete (OPCC), this paper proposed three models which involves the relationship between splitting strength and compressive strength, the relationship between flexural strength and compressive strength, and the relationship between elastic modulus and compressive strength. The results demonstrate that AASC is shown to be similar in splitting strength with OPCC with same compressive strength level, while to be higher in flexural strength than OPCC. And the relationship between elastic modulus and compressive strength of AASC activated by NaOH is highly close to OPCC, while the elastic modulus of AASC activated by water glass is lower than OPCC. Furthermore, it can be found that, the results of Poisson's ratio keep stable even at the stress level of 0.6,and the critical stress level is nearly 0.8 at which Poisson's ratio booms. © 2018, Materials Review Magazine. All right reserved.

引用

页码：2091 / 2095

页数：4

共 24 条

[1] Shi C., Jimenez A.F., Palomo A., New cements for the 21st century: The pursuit of an alternative to Portland cement, Cement and Concrete Research, 41, 7, (2011)
[2] Provis J.L., Palomo A., Shi C., Advances in understanding alkali-activated materials, Cement and Concrete Research, 78, (2015)
[3] Fernandez-Jimenez A., Palomo J.G., Puertas F., Alkali-activated slag mortars: Mechanical strength behavior, Cement and Concrete Research, 29, 8, (1999)
[4] Wang S.D., Scrivener K.L., Pratt P.L., Factors affecting the strength of alkali-activated slag, Cement and Concrete Research, 24, 6, (1994)
[5] Zhu H., Zhang Z., Zhu Y., Et al., Durability of alkali-activated fly ash concrete: Chloride penetration in pastes and mortars, Construction and Building Materials, 65, 13, (2014)
[6] Ismail I., Bernal S.A., Provis J.L., Et al., Influence of fly ash on the water and chloride permeability of alkali-activated slag mortars and concretes, Construction and Building Materials, 48, 11, (2013)
[7] Bakharev T., Sanjayan J.G., Cheng Y.B., Sulfate attack on alkali-activated slag concrete, Cement and Concrete Research, 32, 2, (2002)
[8] Thomas R.J., Peethamparan S., Alkali-activated concrete: Engineering properties and stress-strain behavior, Construction and Building Materials, 93, 4, (2015)
[9] Sofi M., Deventer J.S.J.V., Mendis P.A., Et al., Engineering properties of inorganic polymer concretes (IPCs), Cement and Concrete Research, 37, 2, (2007)
[10] Lee N.K., Lee H.K., Setting and mechanical properties of alkali-activated fly ash/slag concrete manufactured at room temperature, Construction and Building Materials, 47, 5, (2013)

← 1 2 3 →