Implementation of High Power Digital-Analog Hybrid Real-time Simulation for Modern Power Systems

被引：0
|
作者：
Zeng J. [1 ]
Leng F. [2 ]
Chen X. [1 ]
Chen X. [1 ]
Li J. [2 ]
Mao C. [2 ]
机构：
[1] Electric Power Research Institute of Guangdong Power Grid Co. Ltd., Guangzhou
[2] State Key Laboratory of Advanced Electromagnetic Engineering and Technology (Huazhong University of Science and Technology), Wuhan
来源：
Leng, Feng (lengfeng@hust.edu.cn) | 1600年 / Automation of Electric Power Systems Press卷 / 41期
关键词：
Digital-analog hybrid real-time simulation; High power interface; Interface algorithm based on ideal transformer model (ITM); Power hardware in-the-loop (PHIL);
D O I：
10.7500/AEPS20160726003
中图分类号：
学科分类号：
摘要：
Digital-analog hybrid simulation technology combining the advantages of real-time digital simulation and physical simulation will be effective for simulation and analysis in future power systems. In order to meet the development need of modern power systems, this paper proposes a architecture of the universal high power digital-analog hybrid simulation system. And it adopts the improved interface algorithm based on ideal transformer model (ITM), the high power interface on the physical side based on power electronic converter and the anti-interference signal interface system, and achieves the 400 V/50 kVA high power digital-analog hybrid real-time simulation system. Digital-analog hybrid simulation experiments have been carried out on the digital-analog hybrid simulation platform, by comparing the results of real-time digital simulation, which verifies the stability and accuracy of the system. © 2017 Automation of Electric Power Systems Press.
引用
收藏
页码：166 / 171and178
相关论文
共 16 条
  • [1] Sham M.V., Vittal K.P., Development of DSP based high speed numerical distance relay and its evaluation using hardware in loop power system simulator, IEEE PES Innovative Smart Grid Technologies, pp. 37-42
  • [2] Zheng S., Lei X., Retzmann D., Et al., Computer and real-time digital simulation of power systems: Part two real-time digital simulation of power systems, Automation of Electric Power Systems, 25, 14, pp. 40-44, (2001)
  • [3] Li H., Han Y., Wang Z., Et al., Verification of HVDC controller using an advanced hybrid real-time simulator, Automation of Electric Power Systems, 24, 17, pp. 28-31, (2000)
  • [4] Ye J., Min Y., Min R., Et al., Hardware-in-the-loop simulation technology based on timing analysis: Part one timing analysis and discrete dynamic model, Automation of Electric Power Systems, 36, 13, pp. 20-25, (2012)
  • [5] Ren W., Steurer M., Baldwin T.L., Improve the stability and the accuracy of power hardware-in-the-loop simulation by selecting appropriate interface algorithms, IEEE Trans on Industry Applications, 44, 4, pp. 1286-1294, (2008)
  • [6] Ayasun S., Fischl R., Vallieu S., Et al., Modeling and stability analysis of a simulation-stimulation interface for hardware-in-the-loop applications, Simulation Modelling Practice and Theory, 15, 6, pp. 734-746, (2007)
  • [7] Liu Y., Steurer M., Ribeiro P., A novel approach to power quality assessment: real time hardware-in-the-loop test bed, IEEE Trans on Power Delivery, 20, 2, pp. 1200-1201, (2005)
  • [8] Li H., Steurer M., Shi K.L., Et al., Development of a unified design, test, and research platform for wind energy systems based on hardware-in-the-loop real-time simulation, IEEE Trans on Industrial Electronics, 53, 4, pp. 1144-1151, (2006)
  • [9] Steurer M., Edrington C., Sloderbeck M., Et al., A megawatt-scale power hardware-in-the-loop simulation setup for motor drives, IEEE Trans on Industrial Electronics, 57, 4, pp. 1254-1260, (2010)
  • [10] Hu T., Zhu Y., Zhang X., Et al., Power connection technology for full-digital real-time simulator and analogue simulator, Power System Technology, 34, 1, pp. 51-55, (2010)
12