Magnesium–samarium oxide nanocomposites: Room-temperature depth-sensing nanoindentation response

被引：0

作者：

Haghshenas M. ^{[1
]}

Song X. ^{[2
]}

Hasannaeimi V. ^{[3
]}

Mukherjee S. ^{[3
]}

Gupta M. ^{[4
]}

机构：

[1] Micro/Nano-Mechanics Laboratory, Department of Mechanical Engineering, University of Toledo, Toledo, OH

[2] Department of Mechanical Engineering, Weifang University, Weifang

[3] Department of Materials Science and Engineering, University of North Texas, Denton, TX

[4] Department of Mechanical Engineering, National University of Singapore

来源：

Haghshenas, M. (meysam.haghshenas@engr.und.edu) | 1600年 / KeAi Publishing Communications Ltd.卷 / 03期

关键词：

Creep; Mg nanocomposite; Nanoindentation; Nanoparticles; Rare-earth; Sm[!sub]2[!/sub]O[!sub]3[!/sub;

D O I：

10.1016/j.ijlmm.2019.12.003

中图分类号：

学科分类号：

摘要：

Lightweight energy-saving magnesium (Mg) nanocomposites could be titled materials of future. Remarkable specific strength along with acceptable ductility is two key features of these materials which have made them a unique class of emerging materials. However, magnesium nanocomposites are at the initial stages of development and therefore systematic research is required to establish microstructure/property relationships at different potential conditions (i.e. temperatures and strain rates). In this paper, a recently introduced magnesium-samarium oxide (Mg–Sm2O3) nanocomposite, with different volume fractions of nanosize Sm2O3 particles as reinforcement, is employed to study ambient temperature rate-dependent plastic response of the material. To study the rate-dependent response of the materials, a depth-sensing nanoindentation measurement technique was used which is considered a non-destructive, robust, and convenient method to assess the controlling mechanisms of creep phenomenon in small scales. Tests were performed on both nanocomposites and pure Mg for the purpose of comparison. Microstructural observations and nanoindentation data indicate that the creep resistance of the materials is directly associated with the volume fraction of the nanoparticles. The results of this study would provide the required reference lines for the forthcoming elevated temperature creep assessment of the materials. © 2019 The Authors

引用

页码：217 / 225

页数：8

共 32 条

[1]

Robson J.D., Haigh S.J., Davis B., Griffiths D., Grain boundary segregation of rare-earth elements in magnesium alloys, Metall. Mater. Trans. A, 47, 1, pp. 522-530, (2016)

[2]

Tekumalla S., Seetharaman S., Almajid A., Gupta M., Mechanical properties of magnesium-rare earth alloy systems: a review, Metals, 5, 1, pp. 1-39, (2015)

[3]

Hassan S.F., Gupta M., Development of nano-Y2O3 containing magnesium nanocomposites using solidification processing, J. Alloy. Comp., 429, 1-2, pp. 176-183, (2007)

[4]

Ding J., Fang Z., Qin L., Zhao W.M., Effect of Re addition on the ignition resistance of pure magnesium, Mater. Sci. Forum, 788, pp. 88-92, (2014)

[5]

Navrotsky A., Lee W., Mielewczyk-Gryn A., Ushakov S.V., Anderko A., Wu H., Riman R.E., Thermodynamics of solid phases containing rare earth oxides, J. Chem. Thermodyn., 88, pp. 126-141, (2015)

[6]

Martienssen W., Warlimont H., Springer Handbook of Condensed Matter and Materials Data, (2006)

[7]

Kujur M.S., Mallick A., Manakari V., Parande G., Tun K.S., Gupta M., Significantly enhancing the ignition/compression/damping response of monolithic magnesium by addition of Sm2O3 nanoparticles, Metals, 7, 9, (2017)

[8]

Li W.-B., Henshall J.L., Hooper R.M., Easterling K.E., The mechanisms of indentation creep, Acta Metall. Mater., 39, 12, pp. 3099-3110, (1991)

[9]

Li H., Ngan A.H.W., Size effects of nanoindentation creep, J. Mater. Res., 19, 2, pp. 513-522, (2004)

[10]

Zhao J., Huang P., Xu K.W., Wang F., Lu T.J., Indentation size and loading strain rate dependent creep deformation of nanocrystalline Mo, Thin Solid Films, 653, pp. 365-370, (2018)

← 1 2 3 4 →