Facile synthesis of carbon nanotubes-graphene aerogels and its adsorption property for emulsified oil in water

被引：0

作者：

Ma Y. ^{[1
]}

Liu H. ^{[1
]}

Chen S. ^{[1
]}

Ding C. ^{[1
]}

机构：

[1] College of Chemical Engineering, China University of Petroleum, Qingdao, 266580, Shandong

来源：

Huagong Xuebao/CIESC Journal | 2018年 / 69卷 / 04期

关键词：

Adsorption; Aerogels; Carboxylated carbon nanotubes; Composites; Graphene; Kinetics;

D O I：

10.11949/j.issn.0438-1157.20170895

中图分类号：

学科分类号：

摘要：

Graphene oxide (GO) was prepared by an improved Hummers-Offeman's method. The GO and carboxylated multi-walled carbon nanotubes (CNTs-COOH) was used as raw materials, polyvinyl pyrrolidone (PVP) as crosslinking agent and ethylenediamine (EDA) as the reducing agent. Hydro-thermal method was adopted in the preparation of carbon nanotubes-graphene aerogel (CGA). The density was between 8.40 mg•cm-3 and 14.42 mg•cm-3 for CGAs under different mass ratios of GO toCNTs-COOH. The mechanical strength of the composite aerogel under the mass ratio of GO: CNTs-COOH=3: 1 is optimal. The characterized results by scanning electron microscopy (SEM), X ray diffraction (XRD), X ray photoelectron spectroscopy (XPS) showed that GO and CNTs-COOH have been successfully assembled into reducing porous aerogel structure. The study on CGA sample adsorption characteristics of emulsified diesel oil in water at different temperatures showed that the adsorption capacity of CGA increased rapidly in the first 6min. The adsorption equilibrium was achieved in about 30 min. With the increase of temperature, the equilibrium adsorption capacity increased gradually. The adsorption process follows pseudo-second order kinetics model. The apparent activation energy is 7.10 kJ•mol-1. Through the particlediffusion model analysis, it is found that the adsorption process of CGA is divided into an outer surface adsorption and pore adsorption processes, which include large inner pore adsorption, mesopore adsorption and small-size pore adsorption. © All Right Reserved.

引用

页码：1508 / 1517

页数：9

共 30 条

[1]

Orge C.A., Sousa J.P.S., Goncalves F., Et al., Development of novel mesoporous carbon materials for the catalytic ozonation of organic pollutants, Catalysis Letters, 132, 1-2, pp. 1-9, (2009)

[2]

Wang X., Kalali E.N., Wan J.T., Et al., Carbon-family materials for flame retardant polymeric materials, Progress in Polymer Science, 69, 1, pp. 22-46, (2017)

[3]

Lin C.G., Hu J., Song Y.F., Polyoxometalate-functionalized nanocarbon materials for energy conversion, energy storage, and sensor systems, Advances in Inorganic Chemistry, 8, 3, pp. 776-789, (2017)

[4]

Iijima S., Helical microtubules of graphitic carbon, Nature, 354, 6348, pp. 56-58, (1991)

[5]

Rafiee M.A., Graphene, Dissertations & Theses-Gradworks, 442, 7100, pp. 282-286, (2011)

[6]

Hu H., Zhao Z., Wan W., Et al., Ultralight and highly compressible graphene aerogels, Advanced Materials, 25, 15, pp. 2219-2223, (2013)

[7]

Wu Y., Yi N., Huang L., Et al., Three-dimensionally bonded spongy graphene material with super compressive elasticity and near-zero Poisson's ratio, Nature Communications, 6, 6141, pp. 1-10, (2015)

[8]

Ren H., Shi X., Zhu J., Et al., Facile synthesis of N-doped graphene aerogel and its application for organic solvent adsorption, Journal of Materials Science, 51, 13, pp. 6419-6427, (2016)

[9]

Sun H., Xu Z., Gao C., Aerogels: multifunctional, ultra-flyweight, synergistically assembled carbon aerogels, Advanced Materials, 25, 18, (2013)

[10]

Lv P., Yu K., Tan X., Et al., Super-elastic graphene/carbon nanotube aerogels and their application as a strain-gauge sensor, RSC Advances, 6, 14, pp. 11256-11261, (2016)

← 1 2 3 →