Novel dissimilar spot welding of aluminium alloy and steel sheets by friction stirring: —Friction anchor welding of aluminium alloy and steel—

被引：3

作者：

Ohishi K. ^{[1
]}

Sakamura M. ^{[1
]}

Ota K. ^{[1
]}

Fujii H. ^{[2
]}

机构：

[1] Hiroshima Prefectural Technology Research Institute, Hiroshima

[2] Joining and Welding Research Institute, Osaka University, Osaka

来源：

Welding International | 2016年 / 30卷 / 02期

关键词：

aluminium alloy; dissimilar metals; friction stirring; FSSW; projection; steel;

D O I：

10.1080/09507116.2014.921088

中图分类号：

学科分类号：

摘要：

Friction stir spot welding (FSSW) has been applied to a dissimilar metal lap joint of an aluminium alloy and steel by stirring only the upper aluminium alloy sheet. Therefore, FSSW cannot be used to weld a lap joint composed of three or more sheets and a lap joint with an adhesive interlayer. In the present work, we propose a novel spot welding process for dissimilar metal lap joints using a new tool with the tip made of spherical ceramics. When this process is applied to the lap joint of the aluminium alloy and steel, the tool can be plunged into the lower steel sheet, then a steel projection is formed in the aluminium alloy sheet. The height of this steel projection increases with the plunge depth, and accordingly, the weld strength increases; the tensile shear strength and the cross tensile strength reached about 3.6 and 2.3 kN/point, respectively. © 2015 Taylor & Francis.

引用

页码：91 / 97

页数：6

共 22 条

[1]

Chiba K., Technology trend of improvement fuel efficient, Jpn Inst Light Met Symp, 78, pp. 1-5, (2006)

[2]

Ota M., Advanced processing technology and future prospects for clean energy vehicles, J Jpn Soc Technol Plast, 53, 613, pp. 93-97, (2012)

[3]

Utsu H., The change to aluminium in car bodies and the applicable technology, Eng Mater, 52, 8, pp. 26-30, (2004)

[4]

Nakanishi E., Weight reduction of automotive vehicle body and joint technologies, Q J Jpn Weld Soc, 23, 1, pp. 151-156, (2005)

[5]

Fujimoto M., Development of new joining technology for weight reduction in automotive industries, J Light Metal Weld Constr, 47, 11, pp. 12-18, (2009)

[6]

Tanaka K., Kumagai M., Yoshida H., Dissimilar joining of aluminum alloy and steel sheets by friction stir spot welding, J Jpn Inst Light Metals, 56, 6, pp. 317-322, (2006)

[7]

Miyagawa K., Tsubaki M., Yasui T., Fukumoto M., Spot welding between aluminum alloy and low carbon steel by friction stirring, Q J Jpn Weld Soc, 26, 1, pp. 42-47, (2008)

[8]

Aota K., Takahashi M., Ikeuchi K., Friction stir spot welding of aluminum to steel by rotating tool without probe, Q J Jpn Weld Soc, 26, 3, pp. 227-234, (2008)

[9]

Shoji Y., Takase K., Gendo T., Tao K., Morikawa K., Noguchi T., Development of spot friction welding technology of aluminum alloy and steel, Mazda Eng Rep, 24, pp. 90-94, (2006)

[10]

Lee C.Y., Choi D.H., Yeon Y.M., Jung S.B., Dissimilar friction stir spot welding of low carbon steel and Al–Mg alloy by formation of IMCs, Sci Technol Weld Joining, 14, pp. 216-220, (2009)

← 1 2 3 →