Experimental investigation on seismic behaviors of composite girder with corrugated steel web

被引：0

作者：

Wang S. ^{[1
]}

Liu Y. ^{[1
]}

Zhuang W. ^{[2
]}

Yao H. ^{[2
]}

机构：

[1] Department of Bridge Engineering, Tongji University, Shanghai

[2] Sichuan Province Transport Department Highway Planning, Survey, Design and Research Institute, Chengdu

来源：

Liu, Yuqing (yql@tongji.edu.cn) | 2018年 / Harbin Institute of Technology卷 / 50期

关键词：

Composite girder bridge; Concrete encasement; Corrugated steel web; Seismic behavior; Stiffener;

D O I：

10.11918/j.issn.0367-6234.201705067

中图分类号：

学科分类号：

摘要：

To investigate the seismic behaviors of partially encased composite girder with corrugated steel web and composite girder with stiffened corrugated steel web, the pseudo static models tests with shear span ratio of 1.67 were conducted. The basic seismic performances including failure features, hysteretic curves, load-carrying capacity, ductility, strength and stiffness degradation, energy dissipation and deformation recovery ability were analyzed. The results indicate that the partially encased specimen presented bending-shear failure with local buckling of the corrugated steel web, while the stiffened one was failed by shearing and overall buckling of the web. In addition, the inclined cracks appeared at the end of fixed part for all tested bodies. Compared with the stiffened girder, the partially encased one exhibited a higher load-carrying capacity, ductility and energy dissipation ability. These two kinds of webs can improve the stability of the corrugated steel web, the hysteretic curves are relatively plump and the strength degradation coefficients are greater than 0.9, the viscous damping coefficients are more than 0.2, and the residual deformation ratios are less than 0.61. All of these data indicate that the proposed webs have the smaller strength degradation, and greater energy dissipation and deformation recovery ability. © 2018, Editorial Board of Journal of Harbin Institute of Technology. All right reserved.

引用

页码：61 / 67

页数：6

共 10 条

[1] He J., Liu Y., Chen A., Et al., Mechanical behavior and analysis of composite bridges with corrugated steel webs: state-of-the-art, International Journal of Steel Structures, 12, 3, pp. 321-338, (2012)
[2] He J., Liu Y., Chen A., Et al., Shear behavior of partially encased composite I-girder with corrugated steel web: experimental study, Journal of Constructional Steel Research, 77, pp. 193-209, (2012)
[3] Emami F., Mofid M., Vafai A., Experimental study oncyclic behavior of trapezoidally corrugated steel shear walls, Engineering Structures, 48, 3, pp. 750-762, (2013)
[4] Farzampour A., Laman J.A., Mofid M., Behavior prediction of corrugated steel plate shear walls with openings, Journal of Constructional Steel Research, 114, pp. 258-268, (2015)
[5] Shahmohammadi A., Mirghaderi R., Hajsadeghi M., Et al., Application of corrugated plates as the web of steel coupling beams, Journal of Constructional Steel Research, 85, pp. 178-190, (2013)
[6] Hossain K.M.A., Wright H.D., Behaviour of composite walls under monotonic and cyclic shear loading, Structural Engineering & Mechanics, 17, 1, pp. 69-85, (2004)
[7] Hossain K.M.A., Wright H.D., Experimental and theoretical behaviour of composite walling under in-plane shear, Journal of Constructional Steel Research, 60, 1, pp. 59-83, (2004)
[8] Qiu J., Zhao Q., Research and application of stiffened steel plate shear walls, Building Structure, 45, 16, pp. 52-62, (2015)
[9] Dan D., Fabian A., Stoian V., Theoretical and experimental study on composite steel-concrete shear walls with vertical steel encased profiles, Journal of Constructional Steel Research, 67, 5, pp. 800-813, (2011)
[10] Ramirez P., Sandoval C., Almazan J.L., Experimental study on in-plane cyclic response of partially grouted reinforced concrete masonry shear walls, Engineering Structures, 126, pp. 598-617, (2016)

← 1 →