Hardness and dimensional stability of thermally compressed domestic Korean pine

被引：0
作者：
Hwang, Sung-Wook [1 ]
Cho, Beom-Geun [1 ]
Lee, Won-Hee [1 ]
机构：
[1] Department of Wood Science and Technology, College of Agriculture and Life Sciences, Kyungpook National University, Daegu
来源：
Journal of the Korean Wood Science and Technology | 2015年 / 43卷 / 01期
关键词：
Compressed wood; Dimensional stability; Hardness; Korean pine;
D O I：
10.5658/WOOD.2015.43.1.68
中图分类号：
学科分类号：
摘要：
We conducted a thermal compression of domestic Korean pinewood for a use in flooring. For the evaluation of flooring material, we measured dimensional stability and surface hardness of thermally compressed wood. It is possible to make high-specific gravity woods with a range of 0.82-0.92 after the thermal compression with 50% compression set. The surface hardness increased with an increase in the pressing temperature. The highest value of surface hardness was 23.6 N/mm2, which was obtained from the thermal compressed wood with pressing temperature of 160°C and 30 minutes of pressing time. However, the surface hardness of woods treated at high temperature of 180°C or greater decreased. The recovery of thickness decreased with increasing the pressing temperature. For dimensional stability, compression temperature was more dominant than compression time.
引用
收藏
页码：68 / 75
页数：7
相关论文
共 15 条
  • [1] Asako Y., Kamikoga H., Nishimura H., Yamaguchi Y., International Journal of Heat and Mass Transfer, 45, pp. 2243-2253, (2002)
  • [2] Hwang S.W., Lee W.H., The mechanical properties of heat-compressed radiata pine (Pinus radiata D.Don) by compression set, Journal of The Korean Wood Science and Technology, 39, 4, pp. 311-317, (2011)
  • [3] Hwang S.W., Lee W.H., Hardness and dimensional stability of radiata pine (Pinus radiata D.Don) heat-compressed wood - Effect of press temperature & time, Journal of The Korean Wood Science and Technology, 39, 3, pp. 206-212, (2011)
  • [4] Inoue M., Norimoto M., Tanahashi M., Rowell R.M., Steam or Heat Fixation of Compressed Wood, 25, 3, pp. 224-235, (1993)
  • [5] Jung S.S., Lee W.H., Characteristics of moisture absorption for heat-compressed wood, Journal of the Korea Furniture Society, 9, 1, pp. 9-15, (1998)
  • [6] Kang H.Y., Hygroscopicity and surface hardness of domestic wood heat-treated at 220°C, Journal of the Korea Furniture Society, 19, 4, pp. 229-310, (2008)
  • [7] Korea Forest Service, Statistical Yearbook of Forestry, (2013)
  • [8] KS F 2212. Method of Hardness Test for Wood, (2004)
  • [9] KS F 2204. Method of Test for Water Absorption of Wood, (2009)
  • [10] Kwon S.M., Hwang W.J., Kwon G.J., Kim N.H., Wood quality of Pinus koraiensis and Larix kaempferi, J. For. Sci., Kangwon Nat'l Univ., 20, pp. 170-181, (2004)
12