Assessment of tribological properties of low friction thin layers produced by vacuum methods

被引：0
|
作者：
Paradecka A. [1 ]
Lukaszkowicz K. [1 ]
Sondor J. [2 ]
机构：
[1] Silesian University of Technology, Konarskiego 18a St., Gliwice
[2] LISS, a.s., Dopravni 2603, Roznov p.R.
来源：
Solid State Phenomena | 2019年 / 293卷
关键词：
AFM; Friction coefficient; Low friction thin layers; SEM;
D O I：
10.4028/www.scientific.net/SSP.293.125
中图分类号：
学科分类号：
摘要：
Low friction thin layers are an excellent alternative for conventional coatings. They provide increased life of the elements, to which they were applied, due to enhancing the hardness or chemical and electrochemical resistance. They help to avoid the cracks, oxidation, as well as possible structural changes during the element’s work. However, they primarily improve tribological properties by increasing wear resistance and reducing the friction. This also applies to components operating under variable conditions such as load, speed, temperature. The presented article analyzes the properties of various low-friction thin layers deposited by vacuum methods on the steel substrates. DLC, TiC, MoS2, CrCN thin layers were chosen, as they achieve the lowest possible coefficient of friction. In the framework of this work the measurements of adhesion of the investigated layers to the substrate as well as the friction coefficient, chemical analysis, microstructure and topographic analysis of the low-friction layers were carried out. © 2019 Trans Tech Publications Ltd, Switzerland.
引用
收藏
页码：125 / 140
页数：15
相关论文
共 50 条
  • [1] COMPARING TRIBOLOGICAL PROPERTIES, COEFFICIENT OF FRICTION AND ADHESION THIN LAYERS
    Malek, Vaclav
    Bakalova, Totka
    Volesky, Lukas
    METAL 2015: 24TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2015, : 1129 - 1134
  • [2] Structure of surface layers produced in TiC and TiN at friction in vacuum
    Inst Problem Materialovedeniya, Kiev, Ukraine
    Trenie i Iznos, 4 (752-758):
  • [3] Structure of surface layers produced in TiC and TiN at friction in vacuum
    Britun, V. F.
    Tkachenko, Y. G.
    Journal of Friction and Wear, 16 (04):
  • [4] Structure and tribological properties of DLC:Si/AlCrN low friction thin film
    Paradecka, Agnieszka
    Lukaszkowicz, Krzysztof
    Pawlyta, Miroslawa
    III INTERNATIONAL CONFERENCE OF COMPUTATIONAL METHODS IN ENGINEERING SCIENCE (CMES 18), 2019, 252
  • [5] Tribological properties of low friction coatings and thin films at high temperatures.
    Pauleau, Y
    REVUE GENERALE DE THERMIQUE, 1997, 36 (03): : 192 - 208
  • [6] Evaluation of the microstructure and tribological properties of TiC low-friction thin film
    Paradecka, A.
    TOPICAL ISSUES OF RATIONAL USE OF NATURAL RESOURCES, 2019, : 217 - 222
  • [7] Structure and tribological properties of MoS2 low friction thin films
    Paradecka, Agnieszka
    Lukaszkowicz, Krzysztof
    Sondor, Jozef
    Pancielejko, Mieczyslaw
    II INTERNATIONAL CONFERENCE OF COMPUTATIONAL METHODS IN ENGINEERING SCIENCE (CMES'17), 2017, 15
  • [8] POROSITY OF THIN LAYERS PRODUCED BY VACUUM DEPOSITION.
    Perveyev, A.F.
    Muranova, G.A.
    Soviet Journal of Optical Technology (English translation of Optiko-Mekhanicheskaya Promyshlennost), 1973, 40 (02): : 136 - 137
  • [9] TRIBOLOGICAL PROPERTIES OF DUPLEX LAYERS PRODUCED BY VACUUM TITANIZING PROCESS COMBINED WITH THE ELECTROLYTIC DEPOSITION OF COBALT ALLOY
    Kasprzycka, E.
    Bogdanski, B.
    PROCEEDINGS OF VIII INTERNATIONAL SCIENTIFIC CONFERENCE (BALTTRIB' 2015), 2016, : 82 - 86
  • [10] Structure and tribological properties of thin vacuum are coatings on polysulfone
    Grimberg, I
    Zhitomirsky, VN
    Parkansky, N
    Matthews, A
    Wilson, A
    Boxman, RL
    Weiss, BZ
    Goldsmith, S
    SURFACE & COATINGS TECHNOLOGY, 1997, 94-5 (1-3): : 213 - 219
12345